Lantronix 25148
Industrial Power Supply
Properties
Description
Further Information
Similar products
Print this page
Request Price
show my notes
PDF
Properties
Description
Further Information
PDF
- Universal AC input/full range
- 3 pole AC inlet IEC320-C14
- Built-in active power factor controller function
- Industrial (-30°C to +70°C) operating temperature
- No load power consumption ?0.15 Watts
- Energy efficiency Level VI
- Compliant with EIASA 2007/DoE, NRCan, AU/NZ MEPS, EU ErP and CoC Version 5
- Class 1 power (with earth pin)
- Short circuit/overload/over voltage/over temperature protection
- Fully enclosed 94V-0 flame retardant plastic case
- LED power on indicator
Industrial Power Supply
| Specifications | |
|---|---|
| Connector | 4-pin DIN plug (see plug assignment) |
| Cable | UL1185 16AWG |
| Output Voltage | 48V (Output voltage set at point measure by plug terminal +50% load) |
| Rated Current | 1.87A |
| Current Range | 0-1.87A |
| Rated Power | 90W (max) |
| Ripple & Noise | 240mVp-p (max) (Measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf &47uf capacitor) |
| Voltage Tolerance | ±2.5% (Includes set up tolerance, line regulation, load regulation) |
| Line Regulation | ±1.0% (Line regulation is measured from low line to high line at rated load) |
| Load Regulation | ±2.5% |
| Setup, Rise Time | 1000ms, 50ms/230VAC; 1000ms, 50ms/115VAC at full load (Length of setup time is measured at first cost start. Turning ON/OFF the power supply may lead to increase of the setup time) |
| Hold Up Time | 20ms/230VAC typ; 20ms/115VAC at full load typical |
| Input Voltage | 90-264VAC, 127-370VDC (Derating may be needed under low input voltages. Check the derating curve for more details.) |
| Input Frequency Range | 47-63 Hz |
| Power Factor | PF>0.91/230VAC typical; PF>0/95/115VAC at full load typical |
| Efficiency | 91% typical |
| AC Current | 1.3A/115VAC typical; 0.6A/230VAC typical |
| Inrush Current | 70A/230VAC (max) |
| Leakage Current | 1mA/240VAC (max) |
| Withstand Voltage | I/P-O/P: 3KVAC, I/P-FG: 2KVAC. O/P-FG: 0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25°C/70%RH |
| Protection | Overload: 110-150% rated output power (Hiccup mode, recovers automatically after fault condition is removed) Overvoltage: 105-135% rated output voltage (Shut down o/p voltage, re-power on to recover) Over Temperature: Shut down o/p voltage, re-power on to recover |
| Dimensions | Width: 5.71" [145 mm] Depth: 2.36" [60 mm] Height: 1.26" [32 mm] |
| Environment | Operating: -30°C to +70°C (See derating curve) Storage: -40°C to +85°C Humidity: 20% to 90% (non-condensing) |
| Weight | 0.99 lbs. [0.45 kg] |
| MTBF | 348.7K hours min MIL-HDBK-217F (25°C) |
| Vibration | 10-500Hz, 2G 10min/1 cycle period for 60 min each along X,Y,Z axes |
| Certifications | Safety: UL60950-1, CSA C22.2, TUV EN60950-1, BSMI CNS 14336, CCC Gb4943, PSE J60950-1, AS/NZS 60950.1 approved Emmisions: EN55022 class B, EN61000-3-2,3, FCC Part 15/CISPR22 class B, CNS13438 class B, GB9254, GB17625.1 Immunity: EN61000-4-2,3,4,5,6,8,11 light industry level, criteria A |
| Ordering Information | |
|---|---|
| 25148 | 90 ~ 264 VAC; 127 ~ 370 VDC (Country specific power cord included) |
Customers who viewed this item also viewed