Advantech MIC-1816R
16-bit, 1MS/s, DAQ Platform with ARM Cortex™-A9 i.MX6 1GHz
- i.MX6 Quad - 4x Cortex-A9 processor
- Sampling rate up to 1MS/s
- 4 x IEPE input with preamp gain = 1,10,100
- 8 x Analog input with voltage or 4~20mA
- 2 x Analog outputs, up to 3 MS/s, 16-bit resolution
- Supports digital and analog triggers
- 16 x isolated digital input and 8 x isolated digital output
- 2 x 32-bit programmable counter/timers
- Onboard FIFO memory (4,000 samples)
- Onboard 2G DDR3 memory design
- Build-in 4G EMMC NAND Flash for OS (Yotco only)
- 2-port RS-232 with surge protection
- 1 x 10/100/1000 Base-T RJ-45 LAN ports
- 1 x USB 2.0 and 1 x USB 2.0 OTG
- 2 x CAN ports transmission speeds up to 1Mbps
MIC-1816R is a RISC (ARM) based stand-alone automation controller integrates with data acquisition and signal conditioning to provide IEPE input, analog I/O, isolated digital I/O, and counter functions. This application ready controller also supports serial communication ports and several other networking interfaces to seamlessly enable integration and rapid system development.
Specifications
- Analog Input
- Channels
4-ch IEPE and 8-ch general AI (Voltage/ Current)
Resolution
16 bits
Sample Rate
Single channel: 5 MS/s max.;
Multiple channels: 1 MS/s max.
Note: The sampling rate of each channel is influenced by the number of used channels.
For example, if 4 channels are used, the sampling rate will be 1MS/4 = 250 kS/s per channel.
Trigger Reference
Analog triggers
Trigger Mode
Start, Delayed Start
Stop, Delayed Stop
FIFO Size
4,000 samples
Overvoltage Protection
30 Vp-p
Input Impedance
Voltage : 1 GΩ
Current : 500 Ω
Sampling Modes
Software and external clock
Input Range
Software programmable
Gain | 0.5 | 1 | 2 | 4 | 8 |
Unipolar | NA | 0~10 | 0~5 | 0~2.5 | 0~1.25 |
Bipolar | ±10 | ±5 | ±2.5 | ±1.25 | ±0.625 |
Gain Error (%FSR) | 0.0075 | 0.0075 | 0.0075 | 0.008 | 0.008 |
Current Input Range
4-20mA (according to voltage range 0~10 V)
Current Input Update Rate
20 KS/s
Current Input -3dB frequency
15 Hz
Analog Trigger Reference
-10 ~ +10 V
Analog Tirrger Resolution
16 bits (0.3 mV/step)
Integrated Electronic Piezoelectric (IEPE)Excitation
- Preamplifier Gain
1, 10, 100 switch selectable
AC Couple Upper Cut-Off Frequency
Gain x1, x10(-5%) : 100KHz
Gain x100(-1%) : 50KHz
AC Couple Lower Cut-Off Frequency (-3dB, 1MΩ)
0.58Hz
Accuracy
< ±2% for all gain settings
Complicance
> 24 V Current 4 mA Discharge Time Constant
> 0.3 seconds
DC Offset
< 30 mA
Analog Output
- Channels
2-ch Voltage / Current-sink / Current-source (shared)
Resolution
16 bitsƒ
Sample Rate
3 MS/s max.
Output Range
Software programmable
Voltage Output Range
0V~5V, 0V~10V, ±5V, ±10V
Current Output Range
4-20mA (according to voltage range 0~10 V)
Current Mode Update Rate
20 KS/s
Current Mode Accuracy
Source : 0.15% FSR
Sink : 0.05% FSR
Current Mode Loading
Source : max. 600 Ω
Sink : depends on external voltage
Current Sink Voltage
Sink : max. 50 VDC
Isolated Digital Input
- Channel
8
Isolation Protection
2,500 VDC
Interrupt Capable Channel
1
Digital Filter Channel
1
Opto-Isolator Response
100 us
Input Voltage
Logic 0 : 2V max.
Logic 1 : 5 ~ 50 V
Isolated Digital Output
- Channels
8 (NPN)
Isolation Protection
2,500 VDC
Output Voltage
5 ~ 40 VDC
Sink Current
500 mA max./channel
Opto-Isolator Response
100 μs
Counter
- Channels
2
Resolution
32 bits
Compatibility
5 V/TTL
Isolation Protection
2,500 VDC
Opto-Isolator Response
100 us
General
- Dimensions (W x H x D)
165 x 65 x 130 mm
(6.49" x 2.56" x 5.11")
Power Consumption
15W
Power Requirements
Single 12VDC power input
Weight 2.4 kg (typical)
OS Support
Linux Ubuntu, YotcoRISC
System Hardware
- CPU
NXP ARM® Cortex® -A9 i.MX6 Quad 4 x processor
Memory
Onbard DDR3 2GB
Flash
4 GB eMMC NAND Flash for O.S (Yotco only)
Ethernet
1 x 10/100/1000 Mbps
USB
1 x USB 2.0, 1 x USB 2.0 OTG
Serial Port
2 x RS-232
CAN Port
2 x 1 Mbps
Storage
1 x SATA 2.5” SSD, 1 x SD slot
Environment
- Storage Humidity
5 ~ 95% RH, non-condensing
Operating Temperature
0 ~ 50°C (32 ~ 122°F) @ 5 ~ 85% RH with 0.7m/s air flow
Storage Temperature
-20 ~ 80 °C (-4 ~ 176 °F)
Indicators
LEDs for Power, IDE and LAN (Active, Status)
Customers who viewed this item also viewed