Perle S-100MM

SPHINX in Europe
UK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Mediaconverter > Perle S-100MM

Perle S-100MM

Fast Ethernet Media Converters 100Base-FX
to 100Base-X Fiber Mode Conversion

Perle S-100MM
6597_23676.png
6597_23677.gif
6597_23678.png
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • 100Base-FX to 100Base-X Fiber to Fiber Media Converters
  • Multimode to multimode or multimode to single mode
  • Extend multimode fiber to 120km ( or more through chaining )
  • Choice in SC, LC and ST fiber connector models
  • Signal regeneration prevents signal degradation
  • Advanced Features: Link Pass-Through, Far-End Fault, loopback for each fiber connection

Perle's feature rich S-100MM Fast Ethernet Fiber to Fiber Media Converters enable transparent fiber extension of 100Base-FX multimode fiber to 100Base-FX multimode or 100Base-LX/EX/ZX/BX single mode fiber.


Perle's advanced features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance. In addition, a lifetime warranty and free worldwide technical support make Perle's S-100MM Fast Ethernet Fiber to Fiber Media Converters the smart choice for IT professionals.


Whether you need to extend multimode to multimode or multimode to single mode, Perle has an extensive range of S-100MM Fast Ethernet Fiber to Fiber Media Converters to meet your fiber conversion requirement.


S-100MM Fiber to Fiber Features: 100Base-FX to 100Base-X



Link Pass-Through
When enabled, the state of the receiver on one 100Base-X interface is reflected on the other 100Base-X fiber transmitter.

If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-X fiber interface has no effect on the other interface.

Using Link Pass-Through with Far-End Fault minimizes data loss when a fault occurs. If a fault occurs, the end devices have the indication of a failure available to making trouble shooting easier.
Far-End Fault (FEF)
When enabled, the media converter transmits the Far-End Fault Indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault Indication condition when a valid signal is received.

When disabled, Far-End Fault Indications are not transmitted regardless of the condition of the receive signal on the 100Base-X fiber connection.

The action the media converter takes on receiving a Far-End Fault Indication is dependent on the Link Pass-Through switch setting.
Signal Regeneration Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation.
Cascading Media converters can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances.
Pause (IEEE 802.3xy) Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The fast ethernet media converter supports pause negotiation on the 100Base-TX copper connection.
VLAN The media converter is transparent to VLAN tagged packets.
Remote Loopback The media converter can perform a loopback on each 100Base-X fiber interface.
ProdGrafik

Hardware Specs


Power
Input Supply Voltage 6 - 30 vDC, unregulated ( 12 vDC Nominal )
Current 0.29 amps
Power Consumption 3.5 watts
Power Connector 5.5mm x 9.5mm x 2.1mm barrel socket
Power Adapter
Universal AC/DC Adapter 100-240v AC, regulated DC adapter included
Indicators
Power / TST This green LED is turned on when power is applied to the media converter. Otherwise it is off. The LED will blink slowly when in Loopback test mode.
Fiber link 1 / Receive activity (LK1) This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Fiber link 2 on / Receive activity (LK2) This green LED is operational only when power is applied. The LED is on when the 100Base-X link is on and flashes with a 50% duty cycle when data is received.
Switches - accessible through a side opening in the chassis
Link Pass Through Enabled (Default) - When the state of the receiver is changed on one of the 100Base-X interfaces it is reflected on the other 100Base-X fiber transmitter. If disabled, the 100Base-X fiber interfaces operate independently. Far-End Fault indication on the 100Base-FX fiber interface has no effect on the other interface.
Far-End Fault (FEF) Enabled ( default ) - The media converter transmits the Far-End Fault Indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault Indication condition when a valid signal is received.
Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #2's fiber transmitter is taken off the interface.
Remote Loopback #1 The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)

Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. The 100Base-TX transmitter is taken off the interface.
Remote Loopback #2 The media converter can perform a loopback on the link #1 fiber interface.
Disabled (Default - Up)

Enabled - The 100Base-X receiver is looped to the 100Base-X transmitter. Link #1's fiber transmitter is taken off the interface.
Cables
Fiber Optic Cable Multimode: 62.5 / 125, 50/125, 85/125, 100/140 micron
Single Mode: 9/125 micron (ITu-T 625)
Packet Transmission Characteristics
Bit Error Rate (BER) <10 -12
Environmental Specifications
Operating Temperature 0 C to 50 C (32 F to 122 F)
Storage Temperature minimum range of -25 C to 70 C (-13 F to 158 F)
Operating Humidity 5% to 90% non-condensing
Storage Humidity 5% to 95% non-condensing
Operating Altitude Up to 3,048 meters (10,000 feet)
Heat Output
( BTU/HR )
11.9
MTBF (Hours)** Without power adaptor: 503,679
With power adaptor: 302,090
Chassis Metal with an IP20 ingress protection rating
Mounting
Din Rail Kit Optional
Rack Mount Kit Optional
Product Weight and Dimensions
Weight 0.3 kg, 0.66 lbs
Dimensions 120 x 80 x 26 mm, 4.7 x 3.1 x 1.0 inches
Packaging
Shipping Weight 0.55 kg, 1.2 lbs
Shipping Dimensions 170 x 280 x 70 mm, 6.7 x 10.2 x 2.8 inches
Regulatory Approvals
Emissions FCC Part 15 Class B*, EN55022 Class B*
CISPR 22 Class B*
CISPR 32:2015/EN 55032:2015 (Class A)
CISPR 24:2010/EN 55024:2010
EN61000-3-2
Immunity EN55024
Electrical Safety IEC 60950-1(ed 2); am1, am2
EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
EN60950
CE
Laser Safety EN 60825-1:2007
Fiber optic transmitters on this device meet Class 1 Laser safety requirements per IEC-60825 FDA/CDRH standards and comply with 21CFR1040.10 and 21CFR1040.11.
Environmental Reach, RoHS and WEEE Compliant
Other ECCN: 5A991
HTSUS Number: 8517.62.0050
Perle Limited Lifetime Warranty


* When used with a Class B rated AC power adapter.

**Calculation model based on MIL-HDBK-217-FN2 @ 30 °C




Ordering Details


Model
Port
Connector
Type
Transmit
(dBm)
Receive
(dBm)
Power
Budget
(dBm)
Wavelength
(nm)
Fiber
Type
Operating
Distance
Min
Max
Min
Max
S-100MM-M2ST2 Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
S-100MM-M2SC2 Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
S-100MM-M2LC2 Port 1
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
S-100MM-S2ST20 Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual ST
100BASE-LX
-18.0
-7.0
-32.0
-3.0
14.0
1310
SMF
20 km
(12.4 mi)
S-100MM-S2SC20 Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual SC
100BASE-LX
-18.0
-7.0
-32.0
-3.0
14.0
1310
SMF
20 km
(12.4 mi)
S-100MM-S2LC20 Port 1
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual LC
100BASE-LX
-15.0
0.0
-34.0
-5.0
19.0
1310
SMF
20 km
(12.4 mi)
S-100MM-S2ST40 Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual ST
100BASE-EX
-5.0
0.0
-34.0
-3.0
29.0
1310
SMF
40 km
(25 mi)
S-100MM-S2SC40 Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual SC
100BASE-EX
-5.0
0.0
-34.0
-3.0
29.0
1310
SMF
40 km
(25 mi)
S-100MM-S2LC40 Port 1
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual LC
100BASE-EX
-5.0
0.0
-34.0
-3.0
29.0
1310
SMF
40 km
(25 mi)
S-100MM-S2ST80 Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual ST
100BASE-ZX
-5.0
0.0
-34.0
-3.0
29.0
1550
SMF
80 km
(50 mi)
S-100MM-S2SC80 Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual SC
100BASE-ZX
-5.0
0.0
-34.0
-3.0
29.0
1550
SMF
80 km
(50 mi)
S-100MM-S2LC80 Port 1
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual LC
100BASE-ZX
-5.0
0.0
-34.0
-3.0
29.0
1550
SMF
80 km
(50 mi)
S-100MM-S2ST120 Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual ST
100BASE-ZX
0.0
5.0
-35.0
-3.0
35.0
1550
SMF
120 km
(75 mi)
S-100MM-S2SC120 Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual SC
100BASE-ZX
0.0
5.0
-35.0
-3.0
35.0
1550
SMF
120 km
(75 mi)
S-100MM-S2LC120 Port 1
Dual LC
100BASE-FX
-20.0
-12.0
-30.0
-14.0
10.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Dual LC
100BASE-ZX
0.0
5.0
-34.0
-3.0
34.0
1550
SMF
120 km
(75 mi)



Single Fiber Models      Recommended use in pairs

Model
Port
Connector
Type
Transmit
(dBm)
Receive
(dBm)
Power
Budget
(dBm)
Wavelength
(nm)
Fiber
Type
Operating
Distance
Min
Max
Min
Max
S-100MM-S1ST20U Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single ST
100BASE-BX
-14.0
-8.0
-32.0
-3.0
18.0
1310/1550
SMF
20 km
(12.4 mi)
S-100MM-S1ST20D Port 1
Dual ST
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single ST
100BASE-BX
-14.0
-8.0
-32.0
-3.0
18.0
1550/1310
SMF
20 km
(12.4 mi)
S-100MM-S1SC20U Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single SC
100BASE-BX
-14.0
-8.0
-32.0
-3.0
18.0
1310/1550
SMF
20 km
(12.4 mi)
S-100MM-S1SC20D Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single SC
100BASE-BX
-14.0
-8.0
-32.0
-3.0
18.0
1550/1310
SMF
20 km
(12.4 mi)
S-100MM-S1SC40U Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single SC
100BASE-BX
-8.0
-3.0
-33.0
-3.0
25.0
1310/1550
SMF
40 km
(25 mi)
S-100MM-S1SC40D Port 1
Dual SC
100BASE-FX
-20.0
-12.0
-31.0
-14.0
11.0*
1310
MMF
2 km
(1.2 mi)
Port 2
Single SC
100BASE-BX
-8.0
-3.0
-33.0
-3.0
25.0
1550/1310
SMF
40 km
(25 mi)


The minimum fiber cable distance for all converters listed is 2 meters.

*Based on use with 62.5/125 micron multimode fiber.


Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.