Advantech Conel BB SmartMotion ST352

SPHINX in Europe
UK
  • AT
  • BE
  • DK
  • FR
  • DE
  • IE
  • IT
  • NL
  • ES
  • SE
  • CH
  • UK
Product groups > Router > Advantech Conel BB SmartMotion ST352

Advantech Conel BB SmartMotion ST352

TWIN CELLULAR MODULE ROUTER

Advantech Conel BB SmartMotion ST352
5857_18284.png
5857_18285.jpg
  • PropertiesProperties
  • DescriptionDescription
  • Further InformationFurther Information
  • PDFPDF
  • Two Independent cellular modules for advanced fail over feature
  • Powerful CPU and enhanced memory to support high demand customer applications
  • Load Balancing
  • Extended operational temperature range from -40 °C to +75 °C
  • 10-60 VDC operated with transient and reverse polarity voltage protection
  • GPS and GLONASS support
  • MicroSD card holder
  • Low power consumption mode for solar and battery power applications
  • Optional industrial grade WiFi
  • PoE PD, PoE PSE, In/Out, USB Host
  • Advanced security features

SmartMotion automatic wireless failover protects against loss of communications in wired or wireless networks by using dual LTE/4G cellular module technology that accommodates multiple cellular carriers. Smartmotion provides transfer speeds up to 50 Mbit/s and download speeds of up to 100 Mbit/s meeting the high demand required for video transfer.

The SmartMotion is designed and tested to meet the requirements of industrial, mobile, security and other harsh environment application where standard commercial designs fail. Specifications include wide operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module), input voltage range 10 V DC to 60 V DC, and advanced sleep mode feature to allow low power consumption for solar and battery power applications.

The SmartMotion places intelligence out at the network edge with an extremely powerful CPU and enhanced embedded memory capacity providing full support for LTE/4G (long Term Evolution) speeds and applications. A secure Web interface allows users to configure and manage the SmartMotion from remote locations.
The router can also upgrade its configuration and firmware from the operator’s central server, allowing for simultaneous mass reconfiguration of every router on the network. Users may insert Linux scripts and they can create multiple configurations for the same router. Users may switch from one configuration to another at any time.

The flexible SmartMotion concept includes 2 Ethernet ports with 2 independent LANs/IP addresses. The standard configuration also includes 1 USB host port, 1 microSD card holder, 4 SIM card holders for automatic failover to an alternate service provider, 2 binary inputs(I/O) , 1 binary output (I/O) and onboard GPS. An optional built-in WiFi module is also available, with industrial grade operating temperature ranges from -40 to +75 °C (-20 to +60 °C LTE450 module).

The SmartMotion supports real time data encryption and the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartWorx HUB, SmartCluster VPN Server and R-SeeNet.
ProdGrafik

HW SPECIFICATIONS

PORTS, LED, ANTENNAS
2× ETH ports RJ45, 10/100 Mbps
4× SIM 2 Mini SIMs (2FF) (rear panel)
LED Indicators PWR, DAT, WAN, ETH, SIM, USR, POE, IN0, IN1, OUT
5× ANT - ANT, DIV SMA connectors
1× Wi-Fi Antenna *Optional R-SMA connector
1× USB USB Host connector 2.0
1× SD Card 1× Micro SD Card slot (rear panel)
RESET RESET button (rear panel)
POWER
Power Supply
(sold separately)
10 – 60 VDC (2–Way Molex connector)
Power Consumption Idle: 2.5 W
Average: 4 W
Peak: 11 W
Sleep Mode: 10mW
ENVIRONMENTAL
Temperature Range Operating: -40 to +75 °C
Storage: -40 to +85 °C
Temperature Range LTE450 Operating: -20 to +60 °C
Storage: -40 to +85 °C
Humidity Operating: 0 to 95 %
Storage (Non-condensing): 0 to 95 %
Cold Start -35 °C
Operating Altitude 2000 m / 70 kPa
Ingress Protection Rating IP30
MECHANICAL
Metal case with metal DIN rail
Enclosure Dimensions 55x97x125 mm
Weight Metal 375 g
GNSS SPECIFICATIONS
Antenna 50 Ohms – active
Protocols NMEA 0183 v3.0
Frequency 1575.42MHz
Sensitivity Tracking: -161dBm
Acquisition (Assisted): -158dBm
Acquisition (Standalone): -145dBm
Acquisition time Hot start: 1 s
Warm start: 29 s
Cold start: 32 s
Accuracy Horizontal: < 2m (50 %); < 5m (90 %)
Altitude: < 4m (50 %); < 8m (90 %)
Velocity: < 0.2mps
WI-FI - 802.11 A/B/G/N, AP OR CLIENT MODES
Supported Wi-Fi band 2.4 GHz, 5.4 GHz
Encryption None, WEP, TKIP, AES
5 GHz supported channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
2.4 GHz supported channels 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
Number of clients 10
Authentication Open, Shared, WPA–PSK, WPA2–PSK


POE PARAMETERS POE PD
parameters for opposite PSE
P0E PSE
Input voltage range 42.5 – 57 V 44 – 57 V, 65 W
Power available 25.50 W 2x 25.50 W
(ETH0, ETH1)
Maximum current 600 mA
Insul. Strength 1.5 kV from the router none
Standards IEEE 802.3at-2009 (PoE+) and IEEE 802.3af-2003 (PoE) supported.
Cabling needed is Category 5, up to 12.5 Ω. It is possible to use a passive PoE injector.




STANDARDS AND REGULATIONS

INDUSTRY CERTIFICATIONS & APPROVALS - ST352
Telecom and emission for the 1st module ETSI EN 301 511 V12.5.1, ETSI EN 300 440 V2.1.1, ETSI EN 301 908-1 V11.1.1, ETSI EN 301 908-2 V11.1.1, ETSI EN 301 908-13 V11.1.1
Telecom and emission for the 2nd module ETSI EN 300 328 V2.1.1, ETSI EN 301 893 V2.1.1
EMC ETSI EN 301 489-1 v1.9.2, ETSI EN 301 489-1 V2.1.1, Draft ETSI EN 301 489-19 V2.1.0, Draft ETSI EN 301 489-52 V1.1.0, ETSI EN 301 489-17 V3.1.1
Safety EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 + AC:2011, EN 62311:2008
E-Mark – EMC for devices in transportation E-Mark homologation number: 10R – 04 8180


CELLULAR MODULE PARAMETERS - ST352 - both cellular modules 2× LTE
LTE parameters Bit rate 100 Mbps (DL) / 50 Mbps (UL)
3GPP rel. 8 standard
Supported bandwidths: 5 MHz, 10 MHz, 20 MHz
Supported frequencies: 800 / 900 / 1800 / 2100 / 2600 MHz
HSPA+ parameters Bit rate 42 Mbps (DL) / 5,76 Mbps (UL)
3GPP rel. 7 standard
UE CAT. 1 to 6, 8, 10, 12, 14
3GPP data compression
Supported frequencies: 900 / 1800 / 2100 MHz
UMTS parameters PS bit rate 384 kbps (DL) / 384 kbps (UL)
CS bit rate 64 kbps (DL) / 64 kbps (UL)
W-CDMA FDD standard
Supported frequencies: 900 / 1800 / 2100 MHz
GPRS/EDGE parameters Bit rate 237 kbps (DL) / 59,2 kbps (UL)
GPRS multislot class 10, CS 1 to 4
EDGE multislot class 12, CS 1 to 4,
MCS 1 to 9
Supported frequencies: 900 / 1800 MHz
Rated Output Power GSM/GPRS 1800 MHz: Class 1
Rated Output Power EDGE 900 / 1800 MHz: Class E2
GPRS/EDGE power classes EGSM 900: Class 4 (33 dBm)
GSM 1800: Class 1 (30 dBm)
EDGE 900: Class E2 (27 dBm)
EDGE 1800: Class E2 (26 dBm)




Ordering Information

Available Modules - BB-ST352
BB-ST35200020 SmartMotion, EMEA, 2x ETH, Metal, No ACC
BB-ST35200020-SWH SmartMotion, EMEA, 2x ETH, Metal, No ACC
BB-ST35200025 SmartMotion, EMEA, 2x ETH, Metal, ACC Int.
BB-ST35200025-SWH SmartMotion, EMEA, 2x ETH, Metal
BB-ST35208025-SWH SmartMotion, EMEA, 2x ETH, PoE PSE, Metal, ACC Int.
BB-ST35209025-SWH SmartMotion, EMEA, 2x ETH, PoE PD, Metal, ACC Int.
BB-ST35210020 SmartMotion, EMEA, 2x ETH, WIFI, Metal, No ACC
BB-ST35210025 SmartMotion, EMEA, 2x ETH, WIFI, Metal, ACC Int.
BB-ST35210025-SWH SmartMotion, EMEA, 2x ETH, WIFI, Metal
BB-ST35218025-SWH SmartMotion, EMEA, 2x ETH, WIFI, PoE PSE, Metal
BB-ST35219025-SWH SmartMotion, EMEA, 2x ETH, WIFI, PoE PD, Metal



Customers who viewed this item also viewed
Accept all Reject Configure

This website uses cookies to provide the best possible experience. More information.