Advantech BB-9POP4
RS-232 4-Channel Optical Isolator
- 2.5 kV isolation
- ESD protection - 15 kV
- Protects up to 4 channels
- 230.4 kbps
- Ideal for laptops, lower power serial ports
The 9POP4 isolates and protects RS-232 equipment from lightning surges, accidental high voltage shorts, and ground loops. RS-232 data signals TD, RD, RTS, and CTS are supported at up to 230.4 kbps. Isolation circuits are 2.5 kV rated and protects valuable equipment while maintaining maximum uptime.
Each side of the isolator receives power from a single 12 VDC power supply to maintain the isolation. This powering configuration allows the device to be used in a system with only one power supply, regardless of the power provided by the RS-232 ports.
The isolator uses DB9 male and DB9 female connectors. The female connector is wired as a DCE and should be connected to a DTE port. The male connector is a DTE and should be connected to a DCE port. If you are connecting a DTE to a DTE or a DCE to a DCE, you will need a null modem adapter.
Power supplies recommended and available from Advantech B+B SmartWorx have been tested and certified. Using any other power supply may bypass or degrade the isolation barrier
SPECIFICATIONS
- SERIAL TECHNOLOGY
- RS-232
TD, RD, RTS, CTS, GND
Data Rate
230.4 kbps
Isolation
2.5 kV
ESD
15 kV Air Discharge, 8 kV Contact
Connectors
DB9 female (DCE)
DB9 male (DTE)
POWER
- Source
External required
Power Connector
2.5 mm jack
Input Voltage
12 VDC
Power Consumption
731 mW
MECHANICAL
- Dimensions
10.4 x 4.3 x 2.0 cm (4.1 x 1.7 x 0.86 in)
Enclosure
IP30, plastic
Weight
54.4 g (0.12 lbs)
MTBF
262084 hours
MTBF Calc. Method
MIL 217F Parts Count Reliability
ENVIRONMENTAL
- Operating Temperature
0 to 70 °C
Storage Temperature
-40 to 85 °C
Operating Humidity
0 to 95% Non-condensing
APPROVALS / CERTIFICATIONS
- Directives
2014/30/EC - Electromagnetic Compatibility Directive
2011/65/EU - Reduction of Hazardous Substances Directive
Standards
EN 55032 (Class B) - Electromagnetic Compatibility of Multimedia Equipment - emission requirements
EN 55024 - IT Equipment - Immunity characteristics - Limits and methods of measurements
EN 61000-6-1 - Generic immunity standard for residential, commercial and light-industrial environments
EN 61000-4-2 - ESD Immunity
EN 61000-4-3 - Radiated Immunity
EN 61000-4-4 - EFT/Burst Immunity
EN 61000-4-6 - RF Conducted Immunity
ORDERING INFORMATION
MODEL NUMBER | DESCRIPTION |
BB-9POP4 | RS-232 4-Channel Optical Isolator |
ACCESSORIES
MODEL NUMBER | DESCRIPTION |
BB-SMI6-12-V-P230-C1 | - Power Supply, 12 VDC 6 Watt, 2.5MM Plug, International AC Input, International AC Blades |
Customers who viewed this item also viewed