Advantech BB-702-W
1PORT(10/100TX)WIRELESSRADIOW/3 MIMOANTENNAS,DIN
- One 10/100BaseTX RJ-45 port
- Three antennas for 3x3 MIMO operations
- Four user-defi nable LEDs for display of signal quality
- Radio enable, link/activity, and power LEDs
- Station roaming
- 802.3af PoE-powered device
- Extended environmental specifi cations
- Auto sensing 10/100BaseTX, duplex, and MDIX
- Rugged DIN-rail enclosure
- Redundant power inputs (20-49 VDC)
- Web browser management
The N-TRON® 702-W Industrial Wireless Radio provides outstanding performance and extreme reliability under the harshest industrial conditions. It is ideally suited for connecting wireless devices to a wired network or for connecting two wired networks where it is not possible, practical, or cost-effective to install cable. The 702-W provides three antennas to facilitate Multiple In, Multiple Out (MIMO) technology for increased throughput. Power over Ethernet (PoE) capability enables the unit to receive power through a Cat5e cable from a PoE sourcing device, such as N-Tron's 105TX-POE Switch or 100-PoE4 Midspan Injector. This ability makes deployments of network nodes much easier as a single Cat5e cable is all that is needed to carry both power and data.
Wireless Compliance
- IEEE 802.11a Compliant
- IEEE 802.11b Compliant
- IEEE 802.11g Compliant
- IEEE 802.11n Compliant
Security
- 802.11i with AES-CCM & TKIP Encryption
- 802.1x, 64/128 bit WEP
Data Rates
- Legacy 802.11a/b/g (1-54 Mbps)
- 802.11n (up to 300 Mbps)
Range Performance
- Indoor (antenna dependent) greater than 300m
- Outdoor (antenna dependent) greater than 60km
SPECIFICATIONS
Physical | |
Height: | (w/o antennas): 5.2" (13.2 cm) |
Width: | 7.4" (18.8 cm) |
Depth (includes DIN-Rail mount): | 1.5" (3.9 cm) |
Weight (max): | 1.9 lbs (0.9 kg) |
DIN-Rail Mount: | 35 mm |
Environmental | |
Operating Temperature: | -40oC to 70oC |
Storage Temperature: | -40oC to 85oC |
Operating Humidity: | 5% to 95% (non condensing) |
Operating Altitude: | 0 to 10,000 ft. |
N-TRON Power Supply: | NTPS-24-1.3 (sold separately) |
Electrical | |
Redundant Input Voltage: | 20-49 VDC (regulated) |
Input Current (max): | 200 mA max @ 24 VDC |
702-W Max Power: | 4.8 watts max |
Input Ripple: | Less than 100 mV |
Reliability | |
MTBF: | >1 million hours |
Network Media | |
10BaseT: | ¡ÝCat3 cable |
100BaseTX: | ¡ÝCat5 cable |
802.11abgn: | Air |
Connectors | |
10/100BaseTX: | One (1) RJ-45 copper port; PoE-powered device support |
802.11abgn: | (3) RP-SMA connectors |
Recommended Wiring Clearance (Antenna Dependent) | |
Front: | 4" (10.2 cm) |
Side: | 4" (10.2 cm) |
Top: | 6" (15.3 cm) |
Regulatory Approvals | |
Safety: | UL 508 and 1604 |
Hazardous Location: | Class I, Div 2, Groups A, B, C, D, T4A; ANSI/ISA-12.12.01-2007 |
EMI | FCC/CE (CFR 47, Part 15, Subpart B - Class A); ANSI C63.4; |
EMC: | R&TTE Directive 99/5/EC ; EN 301 489-3; IEC 61000-4-2 (ESD); IEC 61000-4-3 (RS) |
GOST-R Certified | |
ROHS compliant |
Customers who viewed this item also viewed