Logo

MOXA VPort 464

SPHINX in Europe »  ch es de fr at dk it nl be  «
Phone: +44 (0) 1276 819333 |  Legal Notice |  Contact
     Lupe

You are here » MOXA VPort 464 «

MOXA VPort 464

prodgraf


Superior video performance, 4-channel industrial video encoders



Properties


Description

The VPort 464 4-channel industrial video encoder uses the H.264 video compression algorithm to provide the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various requirements, each channel of the VPort 464 can support 2 video streams simultaneously or you can merge all 4 channels into 1 quad view stream using H.264 and MJPEG compression formats, providing greater flexibility for a variety of uses, including viewing, recording, and analysis. The rugged industrial design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 464 suitable for harsh environments.

The VPort 464 comes with two gigabit Ethernet ports and supports cascade mode and network redundancy. In addition, Moxa’s innovative DynaStream™ technology lets you change the video frame rate automatically, allowing you to control your network bandwidth budget and simplify network system management. The CBR Pro™ function guarantees the lowest packet loss for limited bandwidth transmissions to ensure that images will not exhibit the mosaic effect.




ProdGrafik

Further Information


Video
Video Compression H.264 (MPEG4 part 10, AVC) or MJPEG
Video Inputs 4, BNC connector (1.0 Vpp, 75 ohm)
Video Output Via Ethernet
Video Streams Dual streams for each channel, or 1 quad stream
NTSC/PAL Auto-sensing or manual
Video Viewing • DynaStream™ support for changing the video frame rate automatically
• On-screen display: Text lines, Graphical image (BMP, GIF, or JPEG)
• CBR Pro™: Support for accurate streaming bit rate control
• Maximum of 5 simultaneous unicast connections, and 50 multicast clients
• Image tuning to control brightness, contrast, saturation, hue, sharpness, and noise reduction
Audio
Audio Inputs 1, Line-in 3.5 mm phone jack connector
Audio Outputs 1, Line-out 3.5 mm phone jack connector
Audio Format Mono, PCM (G.711)
Network
Protocols IPv4/v6, TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS, NTCIP
Ethernet 2 10/100/1000BaseT(X) Ethernet ports, RJ45 connectors
Serial Port
PTZ Ports 1 RS-232 or RS-422/485 port, terminal block connector or DB9 male connector, 115.2 kbps
Console Port 1, RS-232 RJ45 port
GPIO
Digital Inputs 4, max. 8 mAHigh: +13 V to +30 V; Low: -30 V to +3 V
Relay Outputs 2, max. 24 VDC @ 1 A
LED Indicators
STAT System status
PWR1 Power 1
PWR2 Power 2
FAULT Can be configured to correspond to system alarm, power failure, or disconnected network
PTZ Indicates if PTZ or COM port data is being transmitted
SD Indicates if microSD card mounting or unmounting is successful
V1, V2, V3, V4 Video input signal activity for channels 1 to 4
Power Requirements
Input Voltage 2 redundant power inputs, 12 to 32 VDC or 18 to 30 VAC, terminal block connector
Input Current 12 to 32 VDC, 1.0 A (max.) or 18 to 30 VAC, 1.0 A (max.)
Power Consumption 12 W (max.)
Physical Characteristics
Housing Metal, IP30 protection
Dimensions 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight 1.13 kg (2.49 lb)
Installation DIN-rail mounting (standard), wall mounting (optional)
Alarms
Video Motion Detection Each channel has 3 independently configurable motion areas
Intelligent Video Surveillance Camera tampering detection
Scheduling Daily repeat timing schedule
Imaging JPEG snapshots for pre/trigger/post alarm images
Custom Alarms HTTP event servers and CGI events for setting customized alarm actions
Email/FTP Messaging Automatic transfer of stored images via email or FTP with event-triggered actions
PTZ (Pan/Tilt/Zoom)
PTZ Camera Control Via RS-232/422/485 PTZ port
PTZ Control Functions Pan, tilt, zoom, focus, moving speed, preset position (max. 128 positions)
PTZ Function Updates Driver upload supported
Supported Device Protocols Pelco D, Pelco P, Custom Camera
Security
Password User level password protection
Filtering By IP address
Authentication 802.1X
Encryption HTTPS, SSH
Environmental Limits
Operating Temperature Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Vibration IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g;
1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g;
1.86 hrs/axis
Shock IEC 60068-2-27, 20g/11ms
Altitude 2000 m
Ingress Protection IEC 60529, IP30
Standards and Certifications
Safety UL 60950-1
EMI CISPR 22, FCC Part 15B Class A
EMS EC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
MTBF (mean time between failures)
Time 569,152 hrs
Standard Telcordia SR332
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty
Minimum Viewing System Requirements
CPU Intel Core i5, 2.4 GHz or above
Memory 1 GB memory or above
OS Windows 7
Browser Internet Explorer 9.x or above
Software Development
VPort SDK PLUS Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
Standards ONVIF, Profile S




ORDERING INFORMATION
Available Models
VPort 464 4-channel industrial video encoder, 2 10/100/1000 BaseT(X) Ethernet ports, -25 to 60°C operating temperature
VPort 464-T 4-channel industrial video encoder, 2 10/100/1000 BaseT(X) Ethernet ports, -40 to 75°C operating temperature
Optional Accessories
    • DIN Rail Power Supplies
MDR-40-24 40W/1.7A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input , -20 to 70°C operating temperature
MDR-60-24 60W/2.5A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -20 to 70°C operating temperature
    • IP Surveillance Software
SoftNVR-IA 64-channel IP video surveillance software designed for industrial automation systems
    • Other Accessories
DR-4524/75-24/120-24 45/75/120 W DIN-Rail 24 VDC power supplies
    • Mounting Kits
WK-46 Wall Mounting Kit
RK-4U 4U-high 19" rack mounting kit




PDF

PDF description MOXA VPort 464 Datasheet (548.5 kB)



Copyright © 2013 SPHINX Computer Vertriebs GmbH

TermsPrivacy PolicyUp ContactCookie DirectiveLocationsAbout us