Logo

IOTWORKSHOP SerialPort Pro-EP20

SPHINX in Europe »  ch es de fr at dk it nl be be  «
Phone: +44 (0) 1276 819333 |  Legal Notice |  Contact
     Lupe

You are here » IOTWORKSHOP SerialPort Pro-EP20 «

IOTWORKSHOP SerialPort Pro-EP20

prodgraf


Embedded Linux Networking Server



Properties


Description

The SerialPort Pro-EP20 unit is a complete solution for adding network connectivity to any device with a serial port connection. Packaged into an RJ45 connector, this powerful device boasts a 10/100BASE-T Ethernet connection, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack and standards-based (AES) encryption.

The SerialPort Pro-EP20 uses highly integrated hardware and software platform, optimised for real world applications such as industrial control, smart grid and remote control. By simply adding the SerialPort Pro-EP20 unit to a product design, device manufacturers can reduce their design cycle and time-to-market with minimal impact and risk.

The SerialPort Pro-EP20 integrates all Serial-to-Ethernet functionality inside a low-profile (50mm x 23mm x 11mm) RJ45 package that can be easily be mounted on to a PCB without any changes to the original design.

The SerialPort Pro-EP20 also includes an embedded web server used to remotely configure, monitor, or troubleshoot the attached device.
The SerialPort Pro-EP20 meets EMC Class B security level and surpasses the certification test for all countries.

Development kit is available



ProdGrafik

Further Information

System Information
Processor/Frequency MIPS/320MHz
Flash/SDRAM 16MB/32MB
Operating System Linux
Ethernet
Port Number 1 RJ45 with LED
Interface Standard 10/100 Base-T Auto-Negotiation
Protection 2KV Isolation
Network Transformer Integrated
Network Protocol IP,TCP,UDP,DHCP,DNS,HTTP Server/Client,ARP, BOOTP, AutoIP, ICMP,Web socket, Telnet, FTP,TFTP, uPNP, NTP, SNMP,Modbus TCP
Security Protocol SSL v3(2048)、 AES 128Bit、3DES、 SHA-1、MD5、Base-64、RSA、ECC
IPV6 Support Support
Serial
Port Number 1 + 1 debug
Interface Standard 3.3V TTL: 2 wire(TX,RX)
Data Bits 7,8
Stop Bit 1,2
Check Bit None,Even,Odd,Space,Mark
Baud Rate TTL: 600 bps~460800bps
Flow Control No Flow control Hardware RTS/CTS、DSR/DTR Software Xon/ Xoffflow control
Software
Web Pages Http Web Configuration Customization of HTTP Web Pages
Log Remote Realtime Log
Configuration Web CLI XML import Telnet IOTManager PC Software
PC Config Tools IOTManager PC Software
SDK For Dev. Support
Basic Parameter
Size 50x 23x 11mm
Operating Temp. -45 ~ 70°C
Storage Temp. -45 ~ 105°C, 5 ~ 95% RH(no condensation)
Input Voltage 3.3V
Working Current ~200mA
Power <700mW
Certificate CE, FCC, RoHS

PDF

PDF description SerialPort Pro-EP20 Datasheet (2644.5 kB)



Copyright © 2013 SPHINX Computer Vertriebs-GmbH

Up TermsPrivacy PolicyContactCookie directiveLocationsAbout us