Logo

Advantech BB-232OPDRI-PH

SPHINX in Europe »  ch es de fr at dk it nl be be  «
Phone: +44 (0) 1276 819333 |  Legal Notice |  Contact
     Lupe

You are here » Advantech BB-232OPDRI-PH «

Advantech BB-232OPDRI-PH

prodgraf


Heavy Industrial RS-232 Isolated Repeater



Properties


Description

The 232OPDRI-PH is our premium Heavy Industrial RS-232 Isolated Repeater. Designed for rugged industrial environments, it has been put through some of the most exacting compliance tests in the industry. Meeting the requirements of IEC 61850-3 and IEEE 1613, it is suitable for installation in electrical substations. These specifications are more stringent than the NEMA TS1/TS2 requirements for transportation applications. Powerful isolation on both data ports protects your equipment and data from damaging ground loops and surges. Additional isolation on the power supply circuits adds a third degree of protection.

Packaged in a rugged IP30 metal case, this repeater operates in wide temperature extremes. The panel mount form factor with DIN Rail mount option makes it easy to integrate into your control panel or other industrial equipment.

Installation and configuration is easy. Data is connected with a DB9 female connector (DCE) and a DB9 male connector (DTE). Power is connected through terminal block that accepts 10 to 48 VDC from any external source.





ProdGrafik

Further Information


SPECIFICATIONS


SERIAL TECHNOLOGY




POWER




TERMINAL BLOCKS




INDICATORS




MECHANICAL




ENVIRONMENTAL




REGULATORY




IEC 61850-3 ELECTRO MAGNETIC INTERFERENCE SPECIFICATIONS
Test Description   Test Level Level
 61000-4-2  ESD  Enclosure Contact
 Enclosure Air
 8 kV
 15 kV
 4
 4
 61000-4-3   Radiated RFI  Enclosure Ports  10 V/m  3
 61000-4-4  Burst (Fast Transient)  Signal Ports
 DC Power Ports
 4 kV @ 2.5 Khz
 4 kV
 -
 4
 61000-4-5  Surge  Signal Ports
 DC Power Ports
 2 kV line to earth, 1 kV line to line
 2 kV line to earth, 1 kV line to line
 4
 3
 61000-4-6  Induced (Conductive) RFI  Signal Ports
 DC Power Ports
 10 V RMS
 10 V RMS
 3
 3
 61000-4-12  Damped Oscillatory  Signal Ports
 DC Power Ports
 2.5 kV common, 1 kV diff mode @ 1MHz
 2.5 kV common, 1 kV diff mode @ 1MHz
 3
 3
 61000-4-16  Mains Frequency Voltage  Signal Ports
 DC Power Ports
 30 V Continuous, 300 V for 1 s
 30 V Continuous, 300 V for 1 s
 4
 4
 61000-4-17  Ripple on DC Power Supply  DC Power Ports  10%  3
IEEE 1613 C37.90 ELECTROMAGNETIC INTERFERENCE SPECIFICATIONS
 C37.90.3  ESD  Enclosure Contact
 Enclosure Air
 8 kV
 15 kV
 -
 C37.90.2  Radiated RFI  Enclosure Ports  10 v/m  -
 C37.90.1  Fast Transient  Signal Ports
 DC Power Ports
 4 kV @ 2.5 kHz
 4 kV
 -
ENVIRONMENTAL SPECIFICATIONS
 60068-2-1  Cold Temperature  Test Ad  (-)40 C, 16 Hours  -
 60068-2-2  Dry Heat  Test Bd  (+)85 C, 16 Hours  -
 60068-2-30  Humidity (damp heat cycle)  Test Dd  90% (non-condensing) (+)55C, 6 Cycles  -
 IEC 600068-2-6  Vibration  Test Fc  4g  Class 2
 IEC 600068-2-27  Shock  Test Ea  50g  Class 2
 IEC 60068-2-32  Drop  -  6 faces, 1 corner, 3 edges, total 10 drops at 1 m  -




PDF

PDF description Advantech BB-232OPDRI-PH Datasheet (472.9 kB)



Copyright © 2013 SPHINX Computer Vertriebs-GmbH

Up TermsPrivacy PolicyContactCookie directiveLocationsAbout us