MOXA VPort 461A
Superior video performance, 1-channel H.264/MJPEG industrial video encoders
- Supports up to 3 video streams simultaneously for H.264 and MJPEG
- Up to Full D1 resolution (720 x 480) @ 90 FPS for 3 video streams with legacy analog video images
- Video latency under 200 ms Industrial IP Surveillance for Mission-Critical Applications
- 2 Ethernet ports for cascade and Ethernet port redundancy
- Moxa DynaStream™ function support for network efficiency
- ONVIF support for standardization and interoperability
- Local storage capability with SD card slot
- Industrial design with -40 to 75°C operating temperature
The VPort 461A 1-channel industrial video encoder with H.264 video compression algorithm provides the best video quality on the market, but with a smaller bandwidth requirement than other video compression standards. In addition, to meet various video stream requirements, the VPort 461A can provide up to 3 video streams simultaneously using H.264 and MJPEG compression formats. Video streams can be used for different purposes, such as viewing,recording, and analyzing. In addition, the industrial rugged design, which includes a -40 to 75°C operating temperature, IP30 protection, and industrial certifications, make the VPort 461A suitable for harsh environments.
The VPort 461A is equipped with Moxa’s innovative DynaStream™ technology to reduce bandwidth consumption of your video transmissions when the network is over-loaded by automatically decreasing the video frame rate. DynaStream™ can also increase video FPS when emergencies occur, offering total control of bandwidthusage to network administrators.
The VPort 461A is equipped with Moxa’s innovative DynaStream™ technology to reduce bandwidth consumption of your video transmissions when the network is over-loaded by automatically decreasing the video frame rate. DynaStream™ can also increase video FPS when emergencies occur, offering total control of bandwidthusage to network administrators.
Video
Audio
Network
Serial Port
Local Storage
GPIO
LED Indicators
Power Requirements
Physical Characteristics
Alarms
PTZ (Pan/Tilt/Zoom)
Security
Environmental Limits
Standards and Certifications
MTBF (mean time between failures)
Minimum Viewing System Requirements
Software Development
- Video Compression
- DynaStream™ support for changing the video frame rate automatically
- Adjustable image size and quality
- Timestamp and text overlay
- Maximum of 10 simultaneous unicast connections, 50 multicast clients
- CBR Pro™ support for accurate streaming bit rate control
- Image manipulation: 180° rotation
- Image tuning: control brightness, contrast, saturation
H.264 (MPEG4 part 10), MJPEG
Video Inputs
1 (BNC connector)
Video Output
via Ethernet
Video Streams
3, H.264 or MJPEG video streams
NTSC/PAL
Auto-sensing or manual
Video Viewing
Audio
- Audio Inputs
1 Line-in or mic-in with 3.5 mm phone jack
Audio Outputs
1 Line-out with 3.5 mm phone jack
Audio Format
Mono, PCM (G.711)
Network
- Protocols
IPv4/v6, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS (ToS), SNMP V3, DDNS, Modbus/TCP, 802.1X, SSH/HTTPS
Ethernet
2 10/100BaseT(X) Ethernet ports, RJ45 connector
Serial Port
- PTZ Ports
1 RS-232 or RS-422/485 port, terminal block connector, 115.2 kbps
COM Ports
1 RS-232 or 485 port, DB9 male connector, 115.2 kbps
Console Port
1 RS-232 port, RJ45 connector
Local Storage
- SD Socket
Standard SD socket, V2.0 (SDHC)
GPIO
- Digital Inputs
2, max. 8 mAHigh: +13 to +30 V; Low: -30 to +3 V
Relay Outputs
2, max. 24 VDC @ 1 A
LED Indicators
- STAT
Indicates if system is booted up properly or not
PWR1
Power 1
PWR2
Power 2
FAULT
Can be configured to correspond to system alarm, power failure, or disconnected network
VIDEO
Video input signal
PTZ
Indicates if PTZ or COM port data has been transmitted
SD
Indicates if SD card was mounted successfully
Power Requirements
- Input Voltage
12 to 32 VDC, or 18 to 30 VAC
Input Current
0.85 A @ 12 VDC; 0.3 A @ 32 VDC; 0.85 A @ 18 VAC; 0.56 A @ 30 VAC
Physical Characteristics
- Housing
Metal, IP30 protection
Dimensions
46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in)
Weight
710 g (1.57 lb), including DIN-rail mounting kit
Installation
DIN-rail mounting (standard), wall mounting (optional)
Alarms
- Intelligent Video
Camera tampering
Video Motion Detection
Includes sensitivity tuning
Scheduling
Daily repeat timing schedule
Imaging
JPEG snapshots for pre/trigger/post alarm images
Custom Alarms
HTTP event servers and CGI events for setting customized alarm actions
Email/FTP Messaging
Automatic transfer of stored images via email or FTP with event-triggered actions
Pre-alarm Buffer
50 MB for JPEG snapshot images
PTZ (Pan/Tilt/Zoom)
- PTZ Camera Control
Via PTZ port or COM port
PTZ Control Functions
Pan, tilt, zoom, focus, moving speed, preset position (max. 128 positions)
PTZ Function Updates
Driver upload supported
Supported Device Protocols
Pelco D, Pelco P, Custom Camera
Security
- Password
User level password protection
Filtering
By IP address
Authentication
802.1X
Encryption
HTTPS, SSH
Environmental Limits
- Operating Temperature
Standard Models: -25 to 60°C (-13 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Vibration
IEC 60068-2-6, 2 to 13.2 Hz: 2 mm (peak-peak); 13.2 to 100 Hz: 0.7g; 1.50 hrs/axis
IEC 60068-2-6, 3 to 9 Hz: 7 mm (peak-peak); 9 to 150 Hz: 1.0g; 1.86 hrs/axis
Shock
IEC 60068-2-27, 20g/11ms
Altitude
2000 m
Ingress Protection
IEC 60529, IP30
Standards and Certifications
- Safety
UL 60950-1
EMC
EN 55022/24
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
IEC 61000-4-11
Transportation
NEMA TS2
MTBF (mean time between failures)
- Time
647,088 hrs
Standard
Telcordia SR332
Minimum Viewing System Requirements
- CPU
Pentium 4, 2.4 GHz or above
Memory
512 MB memory or above
OS
Windows XP/2000 with SP4 or above, Windows Vista, Windows 7
Browser
Internet Explorer 9.x or above
Multimedia
DirectX 9.0c or above
Software Development
- VPort SDK PLUS
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from Moxa’s website).
Standard
ONVIF, Profile S
Ordering Information | |
Available Models | |
VPort 461A | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -25 to 60°C operating temperature |
VPort 461A-T | 1-channel H.264/MJPEG industrial video encoder with 2 10/100BaseT(X) ports, -40 to 75°C operating temperature |
Optional Accessories (can be purchased separately)
| |
MDR-40-24 | 40W/1.7A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input , -20 to 70°C operating temperature |
MDR-60-24 | 60W/2.5A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -20 to 70°C operating temperature |
| |
SoftNVR-IA | 64-channel IP video surveillance software designed for industrial automation systems |
| |
DR-4524/75-24/120-24 | 45/75/120 W DIN-Rail 24 VDC power supplies |
| |
WK-46 | Wall Mounting Kit |
RK-4U | 4U-high 19" rack mounting kit |
Customers who viewed this item also viewed