Logo

MOXA NE-4110A

SPHINX in Europe »  ch es de fr at dk it nl be be  «
Phone: +44 (0) 1276 819333 |  Legal Notice |  Contact
     Lupe

You are here » MOXA NE-4110A «

MOXA NE-4110A

prodgraf


Device server module for RS-422/485 devices, supports 10/100BaseT(x) with RJ45 connector



Properties


Description

Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

SNMP and E-mail Alerts for Event Trap and Notification

NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions: Cold/warm start
Password authentication failure
Change in DSR/DCD line signal
Change in IP address
Change in password





ProdGrafik

Further Information


Form Factor

Type
Ready-to-go pin header modules

Dimensions
57 × 40 mm (2.24 x 1.57 in)

Weight
40 g


Ethernet Interface

Number of Ports
1

Speed
10/100 Mbps, auto MDI/MDIX

Magnetic Isolation Protection
1.5 kV built-in

Connector
RJ45


Serial Interface

Number of Ports
2

Serial Standards
RS-485 Data Direction Control
ADDC® (automatic data direction control)


Serial Communication Parameters

Data Bits
5, 6, 7, 8

Stop Bits
1, 1.5, 2

Parity
None, Even, Odd, Space, Mark

Flow Control
DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF

Baudrate
110 bps to 230.4 kbps


Serial Signals

TTL
RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-422
Tx+, Tx-, Rx+, Rx-, GND

RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND

RS-485-2w
Data+, Data-, GND


Digital I/O Pins

GPIO
4 programmable I/O pins


Software

Network Protocols
ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP

Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility

Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded

Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x

Operation Modes
Real COM, TCP Server, TCP Client, UDP


Environmental Limits

Operating Temperature
Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)

Storage Temperature
-40 to 60°C (-40 to 140°F)

Ambient Relative Humidity
5 to 95% (non-condensing)

Altitude
Up to 2000 m

Note Please contact us if you require products guaranteed to function properly at higher altitudes.


Power Requirements

Input Voltage
5 VDC (±5%)

Power Consumption
290 mA @ 5 VDC max.


Standards and Certifications

EMC
CE, FCC

EMI
EN 55022 Class B, FCC Part 15 Subpart B Class A

EMS
EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11

Green Product
RoHS, CRoHS, WEEE


Reliability

Automatic Reboot Trigger
Built-in WDT (watchdog timer)

MTBF (mean time between failures)
289,573 hrs



Ordering Information


Available Modules
NE-4110A Device server module for RS-422/485 devices, supports 10/100BaseT(x) with RJ45 connector
NE-4110A-T Device server module for RS-422/485 devices, supports 10/100BaseT(x) with RJ45 connector,
-40 to 75°C operating temperature
NE-4110-ST Starter kit for the NE-4110A (module not included)
*NOTE: Starter kits do not include the module. Please order modules and evaluation kits separately.





PDF

PDF description Moxa NE-4110A Datasheet (1202.7 kB)



Copyright © 2013 SPHINX Computer Vertriebs-GmbH

Up TermsPrivacy PolicyContactCookie directiveLocationsAbout us