Advantech BB 100 Mbps Ethernet Media Converter
Product is End of Life : 2021-02-03
iMcV-LIM series
– with LFPT and Configuration Control
- Available for multi-mode or single-mode fiber
- Double fiber capacity with single-strand fiber versions
- Monitor links and receive vital traffic and health information and notification should problems occur
- Modular, hot-swappable architecture reduces operational costs associated with product installation, upgrades and maintenance
- SNMP manageable
- Convert 100 Mbps copper to 100 Mbps fiber
- LFPT and Config Control
Satisfying today’s networking needs while preparing for tomorrow’s cabling requirements can make designing and installing the physical layer of networks a daunting task. The decreasing cost of fiber optic cabling and switching equipment makes all-optical LANs the obvious choice when future-proofing network equipment. Replacing legacy equipment and wiring infrastructure is a costly choice. Managed media conversion allows implementation of new technologies on existing networks, while monitoring all connections, to keep networks running and up-to-date.
B+B SmartWorx offers a wide range of SNMP-managed Ethernet copper to fiber media converters, with a choice of fixed rate or rate conversion capabilities. The “iMcV-“ modules also include troubleshooting features and LEDs to assist in network diagnostics as well as make isolating cable breaks easier. The 100 Mbps iMcV-Lim also features Link Fault Pass-Through. In addition, the modules provide Configuration Control.
All converters feature an RJ-45 copper port and a fiber port, with a choice of SC or ST connectors, and are hot-swappable.
SPECIFICATIONS
TECHNICAL | |
100Base-TX twisted pair | |
100Base-FX or SX fiber | |
AutoCross for MDI/MDIX | |
Features LinkLoss, FiberAlert & Auto Negotiation | |
Features Link Fault Pass-Through (LFPT) | |
Supports Config Control | |
Connectors: RJ-45 and ST, SC | |
50/125μm or 62.5/125μm multi-mode fiber | |
9/125μm single-mode fiber | |
Install in any iMediaChassis or MediaChassis | |
Free software support with iView2 Webserver | |
Support half- and full-duplex operation | |
Include diagnostic LEDs | |
Include hot-swappable architecture | |
MECHANICAL | |
Dimensions | 10.74 x 2 x 7.05 cm ((4.19H x 0.78W x 2.75D in) |
Shipping Weight | 0.11 kg (0.30 lbs) |
ENVIRONMENTAL | |
Operating Temperature | 0 to +50 °C (+32 to +122 °F) |
Storage Temperature | -25 to +70 °C (-13 to +158 °F) |
Operating Humidity | 5 to 95% (non-condensing), 0 to 10,000 ft. altitude |
REGULATORY APPROVALS | |
FCC Class B | |
CE | |
MEANTIME BEFORE FAILURE (MTBF) | |
MTBF | 4.5 million hours |
ORDERING INFORMATION
MODEL NUMBER | FIBER | FIBER PORTS | RANGE | ETHERNET PORTS | ETHERNET CONNECTOR |
iMcV-LIM TX/FX and TX/SX | |||||
BB-850-15611 | SX-MM850-ST | 1 | 2 km | 1 | RJ45 |
BB-850-15612 | SX-MM850-SC | 1 | 2 km | 1 | RJ45 |
BB-850-15613 | FX-MM1300-ST | 1 | 5 km | 1 | RJ45 |
BB-850-15614 | FX-MM1300-SC | 1 | 5 km | 1 | RJ45 |
BB-850-15618 | FX-SM1310/PLUS-SC | 1 | 40 km | 1 | RJ45 |
BB-850-15620 | FX-SM1310/LONG-SC | 1 | 80 km | 1 | RJ45 |
SINGLE STRAND FIBER * | |||||
BB-850-15633 | SSFX-SM1310-SC | 1 | 20 km | 1 | RJ45 |
BB-850-15634 | SSFX-SM1550-SC | 1 | 20 km | 1 | RJ45 |
BB-850-15635 | SSFX-SM1310/PLUS-SC | 1 | 40 km | 1 | RJ45 |
BB-850-15636 | SSFX-SM1550/PLUS-SC | 1 | 40 km | 1 | RJ45 |
* These products have single-strand fiber technology. Deploy in pairs or connect another compatible B+B SmartWorx LLC single-strand fiber product.
Customers who viewed this item also viewed