Advantech BB-7010TX

The N-TRON® 7010TX compact, fully managed industrial Ethernet switch is housed in a rugged industrial metal enclosure and offers a powerful combination of eight 10/100BaseTX copper ports and two SFP gigabit ports. It is ideally suited for use in industrial and utility applications such as factory floor control networks, electric power substations, wind turbines, wastewater treatment facilities, intelligent traffic control and transportation applications, and any other application where high reliability, superior noise immunity, extreme ruggedness, and extended distance are required.


Remote Monitoring Options

- Web browser and N-View OPC (OLE for process control) server software provides configuration and monitoring capability. N-View software easily combines with HMI software to monitor network traffic, alarms, and trends. SNMP is also available for switch link and status monitoring. Status LEDs are configurable to indicate power failure and N-RING status.


N-Ring Technology

- N-Ring technology provides expanded ring capacity, detailed fault diagnostics, and fast 30ms healing time. The ring manager validates the integrity of the ring using health check packets and quickly converts the ring to a linear topology within ~30ms when an error is detected. The health status of a ring comprised of all N-Tron fully managed switches may be monitored. A detailed ring map and fault location chart may be accessed by the ring manager's web browser or the OPC server. N-Link™ allows the linking of two N-Rings. Up to 250 fully managed N-TRON switches are supported in an N-Ring topology.


Industrial Specifications

- High MTBF, extended shock and vibration specifications, wide operating temperaturerange and redundant power inputs are standard features.


Ease of Use

- The 10/100BaseTX ports are auto sensing and auto configuring. Each copper port is automatically negotiated for maximum speed and performance by default, but can also be hard coded through the user interface. A high speed processor allows wire speed capability on all 10/100BaseTX ports simultaneously.



FULLY MANAGED FEATURES:

• SNMP v1, v2, v3 and Web Browser Management
• Confi guration backup via Optional SD card (NTCD)
• Detailed Ring Map and Fault Location Charting
• N-Ring™ Technology with ~30ms Healing
• N-View™ OPC Monitoring
• N-Link™ Redundant N-Ring Coupling
• IGMP Auto configuration
• 802.1Q tag VLAN and Port VLAN
• 802.1p QoS, Port QoS, and DSCP
• EtherNet/IP™ CIP Messaging
• LLDP (Link Layer Discovery Protocol)
• Port Trunking
• Port Mirroring
• 802.1d, 802.1w, 802.1D RSTP
• DHCP Server, Option 82 relay, Option 61
• Local Port IP Addressing

BB-7010TX SPECIFICATIONS

Switch Properties
Number of MAC Addresses:	8000
Aging Time:	Programmable
Latency Typical:	2.6 μs
Switching Method:	Store-and-Forward
Case Dimensions
Height:	4.3" (11 cm)
Width:	2.4" (6.1 cm)
Depth:	4.6" (11.5 cm)
Weight (max):	TBD
DIN-Rail Mount:	35mm
Electrical
Redundant Input Voltage:	10-49 VDC (Regulated)
Input Current (max):	400mA max.@24VDC
N-TRON Power Supply:	NTPS-24-1.3 (1.3A @ 24V)
Environmental
Operating Temperature:	-40 oC to 70 oC
Storage Temperature:	-40 oC to 85 oC
Operating Humidity:	5% to 95% (Non Condensing)
Operating Altitude:	0 to 10,000 ft.
Shock and Vibration (bulkhead mounted)
Shock:	200g @ 10ms
Vibration/Seismic:	50g, 5-200Hz, Triaxial
Reliability
MTBF:	>2 Million Hours
Network Media
10BaseT:	>Cat3 Cable
100BaseTX:	>Cat5 Cable
1000BaseTX:	>Cat5e Cable
Connectors
10/100BaseTX:	Eight (8) RJ-45 Copper Ports
1000BaseSX:	Up to Two (2) LC Duplex Gigabit Fiber Ports (optional)
Recommended Wiring Clearance
Front:	4" (10.2 cm)
Side:	1" (2.6 cm)
Regulatory Approvals
	FCC Title 47, Part 15, Subpart B - Class A; ICES-003 - Class A GOST-R Certified, RoHS Compliant
Designed to comply with:	IEEE 1613 for Electric Utility Substations NEMA TS1/ TS2 for Traffic control IEC-61850

Ordering Information

Available Modules
BB-7010TX	10P ( Eight 10/100BaseTX Ports, Two Optional Gigabit SFP Ports ) MANAGED , DIN