MOXA NPort IA5000A-I/O Series
Product is End of Life : 2023-01-11
1/2-port RS-232/422/485 device server with 6 or 12 digital I/Os
- 6 or 12 digital I/Os to collect local data for status monitoring
- Redundant dual DC power inputs and relay output supported
- Cascading Ethernet ports for easy wiring
- MicroSD for configuration backup
- Warning by relay output and email
- 4 kV serial surge protection
The NPort IA5000A-I/O serial device servers, which have built-in digital I/Os, provide maximum flexibility when you need to integrate serial equipment in the field with an Ethernet network. The combination of digital I/Os makes the device servers well-suited for a variety of industrial data acquisition applications. The DI/Os on the device can be controlled over TCP/IP using the Modbus TCP protocol and can be configured and secured from a web browser. The device can also be installed as a COM Port (patented Real COM) on a Windows/Linux PC to make it compatible with legacy applications.
All models are ruggedly constructed, DIN-rail mountable, and designed with redundant power inputs to ensure uninterrupted operation for industrial applications.
Cascading Ethernet Ports Make Wiring Easy
The NPort IA5000A-I/O device servers come with two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to either another NPort IA device server or another Ethernet device. The dual Ethernet ports reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.
Secure Remote Management and Configuration with SSH/HTTPS
Unauthorized access is one of the biggest headaches for system managers. In addition to IP filtering and password protection, the NPort IA5000A-I/O also supports SSH and HTTPS to provide protection from hackers. To transmit control messages securely, open the web console using a web browser that supports HTTPS (Internet Explorer, for example). You may also open the serial or Telnet console, such as PuTTY, using a terminal emulator that supports SSH.
Select “Any Baudrate” between 50 bps and 921.6 kbps
Most device servers only support a fixed number of serial baudrates. However, some applications require special baudrates, such as 250 kbps or 500 kbps. With the NPort IA5000A-I/O, you can use any baudrate between 50 and 921.6 kbps. If your device’s baudrate is not a standard baudrate, select “other” from the drop-down list and then enter the baudrate.
All models are ruggedly constructed, DIN-rail mountable, and designed with redundant power inputs to ensure uninterrupted operation for industrial applications.
Cascading Ethernet Ports Make Wiring Easy
The NPort IA5000A-I/O device servers come with two Ethernet ports that can be used as Ethernet switch ports. One port connects directly to the network or server, and the other port can be connected to either another NPort IA device server or another Ethernet device. The dual Ethernet ports reduce wiring costs by eliminating the need to connect each device to a separate Ethernet switch.
Secure Remote Management and Configuration with SSH/HTTPS
Unauthorized access is one of the biggest headaches for system managers. In addition to IP filtering and password protection, the NPort IA5000A-I/O also supports SSH and HTTPS to provide protection from hackers. To transmit control messages securely, open the web console using a web browser that supports HTTPS (Internet Explorer, for example). You may also open the serial or Telnet console, such as PuTTY, using a terminal emulator that supports SSH.
Select “Any Baudrate” between 50 bps and 921.6 kbps
Most device servers only support a fixed number of serial baudrates. However, some applications require special baudrates, such as 250 kbps or 500 kbps. With the NPort IA5000A-I/O, you can use any baudrate between 50 and 921.6 kbps. If your device’s baudrate is not a standard baudrate, select “other” from the drop-down list and then enter the baudrate.
Ethernet Interface
Serial Interface
Serial Communication Parameters
Serial Signals
Digital Input/Output
Digital Input
Digital Output
Software
Physical Characteristics
Environmental Limits
Power Requirements
Standards and Certifications
Reliability
MTBF (mean time between failures)
Ordering Information
- Number of Ports
2
Speed
10/100 Mbps, auto MDI/MDIX
Connector
RJ45
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
- Number of Ports
NPort IA5150A-I/O Series: 1
NPort IA5250A-I/O Series: 2
Serial Standards
RS-232/422/485 (DB9 male connector)
Serial Line Surge Protection
4 kV (level 4)
Off-line Port Buffering
NPort IA5150A-I/O Series: 20 MB
NPort IA5250A-I/O Series: 10 MB
Serial Communication Parameters
- Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS and XON/XOFF
Baudrate
50 bps to 921.6 kbps
Serial Data Log
64 KB
Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
Digital Input/Output
- Digital Inputs
- 4 channels for 6I/O models
- 8 channels for 12I/O models
- 2 channels for 6I/O models
- 4 channels for 12I/O models
Digital Outputs
Isolation
3k VDC or 2k Vrms
Digital Input
- Sensor Type
- On: short to GND
- Off: open
- On: 10 to 30 VDC
- Off: 0 to 3 VDC
Wet Contact (NPN or PNP), Dry Contact
I/O Mode
DI or Event Counter
Dry Contact
Wet Contact (DI to COM)
Counter Frequency
20 Hz
Digital Filtering Time Interval
Software Configurable
Digital Output
- Type
Sink
I/O Mode
DO or Pulse Output
Over-Voltage Protection
45 VDC
Over-Current Protection
2.6 A
Over-Temperature Shutdown
175°C (typical), 150°C (min.)
Current Rating
200 mA per channel
Storage Card Slot
1 microSD (SDHC) card slot; supports up to 32 GB
Software
- Network Protocols
ICMP, IPv4, TCP, UDP, DHCP, Telnet, DNS, SNMP V1/V2c/V3, HTTP, SMTP, SNTP, SSH, HTTPS , Modbus TCP (for I/O communication)
Configuration Options
Web Console, Serial Console, Telnet Console, Windows Utility
Secure Configuration Options
HTTPS, SSH
Windows Real COM Drivers
Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers
SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers
Linux 2.4.x, 2.6.x, 3.x, 4.x
Utilities
Device Search Utility and NPort Windows Driver manager
Management
SNMP MIB-II
Physical Characteristics
- Housing
Aluminum sheet metal
Weight
NPort IA5150A-6I/O, NPort IA5150A-12I/O:
without the box: 740 g (1.63 lbs)
with the box: 910 g (2.01 lbs)
NPort IA5250A-6I/O, NPort IA5250A-12I/O:
without the box: 753 g (1.66 lbs)
with the box: 923 g (2.03 lbs)
Dimensions
59.6 x 101.4 x 134 mm (2.35 x 4 x 5.28 in)
Environmental Limits
- Operating Temperature
Standard Models: 0 to 60°C (32 to 131°F)
Storage Temperature
-40 to 75°C (-40 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Power Requirements
- Input Voltage
12 to 48 VDC
Power Consumption
NPort IA5150A-6I/O, NPort IA5150A-12I/O: 300 mA @ 12 V
NPort IA5250A-6I/O, NPort IA5250A-12I/O: 300 mA @ 12 V
Connector
Terminal block
Standards and Certifications
- Safety
UL 60950-1, EN 60950-1
EMC
EN 61000-6-2/6-4
EMI
CISPR 22, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power 1 kV; Signal: Ethernet (2 kV), Serial (4 kV)
IEC 61000-4-6 CS: 10 V
IEC 61000-4-8
Reliability
- Alert Tool
RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
- Time
NPort IA5150A-6I/O: 456,558 hrs
NPort IA5250A-6I/O: 433,352 hrs
NPort IA5150A-12I/O: 337,987 hrs
NPort IA5250A-12I/O: 325,408 hrs
Standard
Telcordia (Bellcore) Standard TR/SR
Ordering Information
Available Models | |
NPort IA5150A-6I/O | 1-port RS-232/422/485 device server with 4DIs and 2DOs, 0 to 60°C operating temperature |
NPort IA5250A-6I/O | 2-port RS-232/422/485 device server with 4DIs and 2DOs, 0 to 60°C operating temperature |
NPort IA5150A-12I/O | 1-port RS-232/422/485 device server with 8 DIs and 4 DOs, 0 to 60°C operating temperature |
NPort IA5250A-12I/O | 2-port RS-232/422/485 device server with 8 DIs and 4 DOs, 0 to 60°C operating temperature |
Optional Accessories
| |
DR-4524 | 45W/2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 50°C operating temperature |
DR-75-24 | 75W/3.2A DIN-rail 24 VDC power supply with universal 85 to 264 VAC or 120-370 VDC input, -10 to 60°C operating temperature |
DR-120-24 | 120W/5A DIN-rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, or 248-370 VDC , -10 to 60°C operating temperature |
| |
WK-51-01 | Wall-mounting kit, 51mm wide |
| |
Mini DB9F-to-TB | DB9 Female to Terminal Block connector |
Customers who viewed this item also viewed