MOXA IA261-I / IA262-I
Product is End of Life : 2020-08-03
RISC-based fanless computers with 2 or 4 optically isolated serial ports, dual LANs, VGA, CAN, DIO, CompactFlash, USB
- Cirrus Logic EP9315 ARM9 CPU, 200 MHz
- 128 MB RAM on-board, 32 MB flash disk
- VGA interface for field site monitoring
- 2 KV digitally isolated RS-232/422/485 serial ports
- Dual 10/100 Mbps Ethernet for network redundancy
- Dual 2 KV digitally isolated CAN ports with CANopen protocol support
- 8+8 DI/DO with 3 KV optical isolation protection
- 12 to 48 VDC redundant power input design
- Supports CompactFlash and USB 2.0 hosts
- Ready-to-run WinCE 6.0 platform
- -40 to 75°C wide temperature models available
The MOXA IA261-I/262-I embedded computers come with 2 or 4 RS-232/422/485 serial ports, dual CANbus ports, dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrial-strength aluminum case.
The MOXA IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA261-I/262-I.
The MOXA IA261-I/262-I computers support RS-232/422/485, CANbus, DI/O channels, and dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. Meanwhile, the IA261-I/262-I comes with 2 KV digital isolation protection for all serial ports and CAN ports, and 3 KV optical isolation protection for DI/O channels, ensuring a reliable system operation and data communication.
With its built-in VGA output interface, the IA261-I/262-I is suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The MOXA IA261-I/262-I computers come with Windows CE 6.0 pre-installed, and support general Windows and .NET 2.0 computing environments. This means that programs developed for standard PC operating systems with tools such Embedded Visual C++ or Visual Studio 2005 can run on the IA261/262 without much porting effort.
In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments.
The MOXA IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA261-I/262-I.
The MOXA IA261-I/262-I computers support RS-232/422/485, CANbus, DI/O channels, and dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. Meanwhile, the IA261-I/262-I comes with 2 KV digital isolation protection for all serial ports and CAN ports, and 3 KV optical isolation protection for DI/O channels, ensuring a reliable system operation and data communication.
With its built-in VGA output interface, the IA261-I/262-I is suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The MOXA IA261-I/262-I computers come with Windows CE 6.0 pre-installed, and support general Windows and .NET 2.0 computing environments. This means that programs developed for standard PC operating systems with tools such Embedded Visual C++ or Visual Studio 2005 can run on the IA261/262 without much porting effort.
In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments.
Hardware Specifications
Computer
CPU
Cirrus EP9315 ARM9 CPU, 200 MHz
OS (pre-installed)
Windows CE 6.0 or Linux
DRAM
128 MB onboard
Flash
32 MB onboard
USB
USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors
Storage
Storage Expansion
CompactFlash slot
Display
Graphics Controller
EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Memory
Dynamic video memory (shares system memory)
Display Interface
CRT interface for VGA output, DB15 female connector
Resolution
1024 x 768, 8 bits
Ethernet Interface
LAN
2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection
1.5 kV built-in
Serial Interface
Serial Standards
2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection
4 kV for all signals
Isolation
2 kV digital isolation
Console Port
RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits
5, 6, 7, 8
Stop Bits
1, 1.5, 2
Parity
None, Even, Odd, Space, Mark
Flow Control
RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates; see user´s manual for details)
Serial Signals
RS-232
TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422
TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w
TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w
Data+, Data-, GND
Digital Input
Input Channels
8, source type
Input Voltage
0 to 30 VDC
Digital Input Levels for Dry Contacts
- Logic level 0: Close to GND
- Logic level 1: Open
Digital Input Levels for Wet Contacts
- Logic level 0: +3 V max.
- Logic level 1: +10 V to +30 V (COM to DI)
Connector Type
10-pin screw terminal block (8 points, COM, GND)
Isolation
3 kV optical isolation
Digital Output
Output Channels
8, sink type
Output Current
Max. 200 mA per channel
On-state Voltage
24 VDC nominal, open collector to 30 V
Connector Type
9-pin screw terminal block (8 points, GND)
Isolation
3 kV optical isolation
CANbus Communication (IA262 models only)
Interface
Dual optically isolated CAN2.0A/2.0B compliant ports
CAN Controller
Phillips SJA1000T
Signals
CAN-H, CAN-L
Isolation
2 kV digital isolation
Speed
10 kbps to 1 Mbps
Connector Type
DB9 male
LEDs
System
Power, Ready, Storage
LAN
10M/Link x 2, 100M/Link x 2 (on connector)
Serial
TxD x 4, RxD x 4
IA261-I: P1 to P4 for serial ports
IA262-I: P1 to P2 for serial ports, P3 to P4 for CAN ports
Switches and Buttons
Reset Button
Supports "Reset to Factory Default"
Physical Characteristics
Housing
Aluminum, industrial vertical form factor
Weight
950 g
Dimensions
60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)
Mounting
DIN rail, wall
Environmental Limits
Operating Temperature
Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature
Standard Models: -20 to 80°C (-4 to 176°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Anti-vibration
5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-shock
50 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage
Redundant power input design
PWR1: 12 to 48 VDC (3-pin terminal block)
PWR2: 12 to 48 VDC (power jack with thread)
Power Consumption With no load on USB ports: 5.8 W
- 240 mA @ 24 VDC
- 480 mA @ 12 VDC
- 450 mA @ 24 VDC
- 900 mA @ 12 VDC
Standards and Certifications
Safety
UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
EMC
EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A
Green Product
RoHS, CRoHS, WEEE
Reliability
Alert Tools
Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger
Built-in WDT (watchdog timer)
MTBF (mean time between failures)
IA261-I: 118,752 hrs
IA261-I: 131,832 hrs
Note
- These hardware specifications describe the embedded computer unit itself, but not its official accessories. In particular, the wide temperature specification does not apply to accessories such as power adapters and cables.
Software Specifications Linux
OS
Linux 2.6.23
File System
JFFS2, NFS, Ext2, Ext3
Internet Protocol Suite
TCP, UDP, IPv4, SNMPv1, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SMTP, Telnet, FTP, TFTP, PPP, PPPoE
Internet Security
OpenVPN, iptables firewall
Web Server (Apache)
Allows you to create and manage web sites
Terminal Server (SSH)
Provides secure encrypted communications between two un-trusted hosts over an insecure network
Dial-up Networking
PPP Daemon for Linux that allows Unix machines to connect to the Internet through dialup lines, using the PPP protocol, as a PPP server or client. Works with ´chat´, ´dip´, and ´diald´, among (many) others. Supports IP, TCP, UDP, and (for Linux) IPX (Novell).
Watchdog
Features a hardware function to trigger system reset in a user specified time interval (Moxa API provided)
Application Development Software
- Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
- GNU C/C++ cross-compiler
- GNU C library
- GDB source-level debugging server
Software Protection
Encryption tool for user executable files (based on patented Moxa technology)
Windows Embedded CE 6.0
OS
Windows Embedded CE 6.0
File System
FAT (for on-board flash)
Internet Protocol Suite
TCP, UDP, IPv4, SNMPv2, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP
Web Server (WinCE IIS)
Supports ASP, ISAPI Secure Socket Layer (SSL 2/3) and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions
Dial-up Networking
Supports RAS client API and PPP, Extensible Authentication Protocol (EAP), and RAS scripting
File Server
Enables remote clients to access files and other resources over the network
Watchdog Features a hardware function to trigger system reset in a user specified time interval. (Moxa API provided)
Application Development Software
- Moxa WinCE 6.0 SDK
- Moxa API Library
- C Libraries and Run-times
- Component Services (COM and DCOM)
- Microsoft® .NET Compact Framework 2.0
- XML, including DOM, XQL, XPATH, XSLT, SAX, SAX2
- SOAP Toolkit Client
- Winsock 2.2
Ordering Information
IA261-I-CE | RISC-based Industrial Ready-to-Run Embedded Computer with 4 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CompactFlash, USB, Windows CE 6.0 |
IA262-I-CE | RISC-based Industrial Ready-to-Run Embedded Computer with 2 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB, Windows CE 6.0 |
Wide Operating Temperature Models (-40 to 75°C)
IA261-I-T-CE | RISC-based Industrial Ready-to-Run Embedded Computer with 4 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CompactFlash, USB, Windows CE 6.0, Wide Temperature |
IA262-I-T-CE | RISC-based Industrial Ready-to-Run Embedded Computer with 2 Serial Ports, 8 DI Channels, 8 DO Channels, Dual LANs, VGA, CAN, CompactFlash, USB, Windows CE 6.0, Wide Temperature |
All item includes |
|
Customers who viewed this item also viewed