MOXA MGate 5119
1-port DNP3/IEC 101/IEC 104/Modbus-to-IEC 61850 gateways
- Supports IEC 61850 MMS server
- Supports DNP3 serial/TCP master
- Supports IEC 60870-5-101 master (balanced/unbalanced)
- Supports IEC 60870-5-104 client
- Supports Modbus RTU/ASCII/TCP master/client
- Embedded traffic monitoring/diagnostic information for easy troubleshooting
- Built-in Ethernet cascading for easy wiring
- -40 to 75°C operating temperature range
- Serial port with 2 kV isolation protection
- Supports IEC 61850 MMS and DNP3 TCP protocol encryption
- Security features based on IEC 62443/NERC CIP
- Compliant with IEC 61850-3 and IEEE 1613
- Built-in SCL file generator for easy configuration
The MGate 5119 is an industrial Ethernet gateway with 2 Ethernet ports and 1 RS-232/422/485 serial port. To integrate Modbus, IEC 60870-5-101, and IEC 60870-5-104 devices with an IEC 61850 MMS network, use the MGate 5119 as a Modbus master/client, IEC 60870-5-101/104 master, and DNP3 serial/TCP master to collect and exchange data with IEC 61850 MMS systems.
Easy Configuration via SCL Generator
The MGate 5119 as an IEC 61850 MMS server, typically, requires the import of a SCL file generated by a 3rd party tool. This can be time-consuming and increase costs. To overcome this pain point, MGate 5119 has a built-in SCL generator, which can easily generate SCL files through the web console and make them available almost immediately saving configuration time and cost.
Easy Troubleshooting via Traffic Monitor
MGate 5119 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104, and IEC 61850 MMS Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.
Easy Configuration via SCL Generator
The MGate 5119 as an IEC 61850 MMS server, typically, requires the import of a SCL file generated by a 3rd party tool. This can be time-consuming and increase costs. To overcome this pain point, MGate 5119 has a built-in SCL generator, which can easily generate SCL files through the web console and make them available almost immediately saving configuration time and cost.
Easy Troubleshooting via Traffic Monitor
MGate 5119 Series gateways support Modbus RTU/ASCII/TCP, IEC 60870-5-101, IEC 60870-5-104, and IEC 61850 MMS Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. It is worth mentioning that traffic logs can be viewed in the popular troubleshooting tool, Wireshark. With this feature, you can easily analyze traffic to determine the root cause of a problem.
Specifications
Package Contents
- Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector)
2
Auto MDI/MDI-X connection
Magnetic Isolation Protection
1.5 kV (built-in)
Ethernet Software Features
- Industrial Protocols
Modbus TCP Client (Master), IEC 60870-5-104 Client, IEC 61850 MMS Server, DNP3 TCP Master
Configuration Options
Web Console (HTTP/HTTPS), Device Search Utility (DSU)
Management
ARP, DHCP Client, DNS, HTTP, HTTPS, SMTP, SNMP Trap, SNMPv1/v2c/v3, TCP/IP,Telnet, SSH, UDP, NTP Client
MIB
RFC1213, RFC1317
Time Management
NTP Client
Security Functions
- Authentication
Local database
Encryption
HTTPS, AES-128, AES-256, SHA-256
Security Protocols
SNMPv3
SNMPv2c Trap
HTTPS (TLS 1.3)
Serial Interface
- Console Port
RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)
No. of Ports
1
Connector
DB9 male
Serial Standards
RS-232/422/485
Baudrate
50 bps to 921.6 kbps
Data Bits
7, 8
Parity
Even, Mark, None, Odd, Space
Stop Bits
1, 2
Flow Control
RTS Toggle (RS-232 only), RTS/CTS
RS-485 Data Direction Control
ADDC® (automatic data direction control)
Pull High/Low Resistor for RS-485
1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485
120 ohms
Isolation
2 kV (built-in)
Serial Signals
- RS-232
TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422
Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w
Data+, Data-, GND
RS-485-4w
Tx+, Tx-, Rx+, Rx-, GND
Serial Software Features
- Industrial Protocols
Modbus RTU/ASCII Master, IEC 60870-5-101 Master (Balanced/Unbalanced), DNP3 Serial Master
Modbus RTU/ASCII
- Mode
Master
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Commands
128
Modbus TCP
- Mode
Client (Master)
Functions Supported
1, 2, 3, 4, 5, 6, 15, 16, 23
Max. No. of Server Connections
32
Max. No. of Commands
128
IEC 60870-5-104
- Mode
Client
Objects Supported
Single point
Double point
Step position
Bit string of 32 bit
Measured value (normalized)
Measured value (scaled)
Measured value (floating)
Integrated totals
Max. No. of Server Connections
32
Max. No. of Information Objects
1200 points
IEC 60870-5-101
- Mode
Master (Balanced/Unbalanced)
Objects Supported
Single point
Double point
Step position
Bit string of 32 bit
Measured value (normalized)
Measured value (scaled)
Measured value (floating)
Integrated totals
Max. No. of Slave Connections
1 (Balanced), 31 (Unbalanced)
Max. No. of Information Objects
1200 points
DNP3 Serial
- Mode
Master
Objects Supported
Binary inputs
Analog inputs
Counters
Frozen counters
Binary outputs
Analog outputs
Max. No. of Outstation Connections
16
Max. No. of Objects
1200 points
DNP3 TCP
- Mode
Master
Objects Supported
Binary inputs
Analog inputs
Counters
Frozen counters
Binary outputs
Analog outputs
Max. No. of Outstation Connections
16
Max. No. of Objects
1200 points
IEC 61850
- Mode
MMS Server
Max. No. of Client Connections
16
Max. No. of Datasets
99
Max. No. of Reports
99
Max. No. of Data Objects
1200 points
Memory
- No. of Data Points
Supported 1,200 points
microSD Slot
Up to 32 GB (SD 2.0 compatible)
Power Parameters
- Input Voltage
12 to 48 VDC
Input Current
455 mA @ 12 VDC
Power Connector
Screw-fastened Euroblock terminal
Relays
- Contact Current Rating
Resistive load: 2 A @ 30 VDC
Physical Characteristics
- Housing
Metal
IP Rating
IP30
Dimensions
36 x 120 x 150 mm (1.42 x 4.72 x 5.91 in)
Weight
517 g (1.14 lb)
Environmental Limits
- Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature (package included)
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
Standards and Certifications
- Safety
EN 60950-1, IEC 60950-1, IEC 62368-1, UL 60950-1, EN 62368-1, UL 62368-1
EMC
EN 55032/35
EMI
CISPR 32, FCC Part 15B Class A
EMS
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV
IEC 61000-4-6 CS: 10 V/m
IEC 61000-4-8 PFMF: 100 A/m
Freefall
IEC 60068-2-32
Shock
IEC 60068-2-27
IEC 61850-3 Edition 2.0
Power Substation
IEEE 1613, IEC 61850-3
Vibration
IEC 60068-2-6, IEC 60068-2-64, IEC 61850-3 Edition 2.0
MTBF
- Time
1,180,203 hrs
Standards
Telcordia SR332
Package Contents
- Device
- 1 x MGate 5119 Series gateway
Cable
- 1 x RJ45-to-DB9 console cable
Installation Kit
- 1 x DIN-rail kit
Documentation
- 1 x quick installation guide
1 x warranty card
Customers who viewed this item also viewed