properties

• Extends 10/100 LAN transmission distance up to 20 KM with Single mode fiber and up to 2 KM with Multi mode fiber
  
• Supports 10/100 Base-TX auto-negotiation and auto-MDI/MDI-X
  
• Supports Link Fault Pass-Through function
  
• Supports Forward 1600 bytes packet for management function
  
• Built in a watchdog timer to monitor internal switch error
  
• Supports flow control for full and half duplex operation
  
• LED display for LAN link/activity, full/half, 10/100 and Fiber status
  
• Detachable Wall and DIN-Rail mounting kit design
  
• 5V terminal block with reverse power protection & DC Jack input

description

SUNIX FTL1218 is the cost-effective solution for conversion between 10/100Base-TX and 100Base-FX. It is excellent for keeping your industrial automation applications running continuously and specially designed for reliable and stable operation in harsh industrial environments. Using the fiber optic medium for Ethernet application not only extends networks for a long distance but also be immune from electrical and magnetic interference. This converter supports Link Fault Pass-through feature for users easily tracing network link failures, and make it easier to maintain.

FTL1218 also has many user friendly features such as optional wall and DIN-Rail mounting tool kit, easy wiring terminal block, and low power consumption capability, for users to easily implement FTL1218 into their applications or projects. It is the best solution not only for application in critical factory and industrial environment, but also incorporating industrialized and user friendly design.Link Fault Pass-ThroughLink Fault Pass-Through feature overcomes a problem that when one side of the connection fails, the other side still keeps sending packets to the disconnected side, and waits for responses that would never arrive. This feature is able to disconnect the connection when any side of the connection fails, allowing the administrator to react promptly to system failures.Auto MDI / MDI-XAuto MDI/MDI-X feature allows users to connect converter’s 10/100BaseTX ports to any kind of Ethernet device without paying attention to the straight-through or cross-over Ethernet cable being used for the connection.

further informations

LAN Communication

Standard	IEEE802.3x & Link Fault Pass-Through
Connector	RJ45 10/100 Base-Tx
Communication	10/100 BASE-TX Full/Half with auto-negotiation and MDI-MDIX

Fiber Communication

Connector	100Base-FX SC Type
Distance	Single mode Fiber up to 20 KM  Multi mode Fiber up to 2 KM
Support	Single mode Fiber 9/125 µm
Cable	Multi mode Fiber 50/125, 62.5/125, or 10/125 µm
Wave length	Single mode Fiber 1310nm  Multi mode Fiber 1310nm
Min. TxD output	Single mode Fiber -15 dBm  Mulit mode Fiber -20 dBm
Max. TxD output	Single mode Fiber 0 dBm  Multi mode Fiber - dBm
Sensitivity	Single mode Fiber -32 dBm  Multi mode Fiber -30 dBm

Power

Power Input	5 VDC External Power, Terminal Block & DC Jack type
Protection	Reverse Power Protection (Protects against V+ & V- reverse)
Power Consumption	< 2.5W=5V x 500mA

LED

LED	Power, RxD for Fiber,TxD for Fiber, Fiber Status

Operation Environment

Operating  Temperature	0 ~ 60 °C
Humidity	5 ~ 95% RH
Storage Temperature	-20 ~ 85 °C

Available Model

FTL1218	Single-mode 10/100 Base-TX to 100 Base-FX Fiber Converter
FTL1218M	Multi-mode 10/100 Base-TX to 100 Base-FX Fiber Converter

Optional Accessories

1. Power Adapter 5V / 1A,
2. Wall Mount Kit
3. DIN-Rail Mount Kit
4. Rubber foot stub / Screw