SUNIX 8139 Series

- SUNIX 8139 Series -

SUNIX 8139 Series

2 Ports RS-422/485 Universal PCI Card with optional Surge and Isolation Protection

description

SUNIX universal PCI Multi-port serial card attaches DB9 or DB25 Male RS-422/485 Serial ports on your system for industrial communication and automation applications. The 8139 card works with both 3.3V or 5V and 32-bit or 64-bit PCI Bus, allowing this multi-port serial card to be installed in virtually any available PC system and compatible with all major operating systems. Users do not need any jumper to set I/O address and IRQ location. The card supports 2 independent RS-422 or RS-485 ports, with each port transfer data up to 921.6 Kbps and able to control device in a multi-drop mode. Furthermore, isolation and surge function (optional) can protect your equipment and controller from being damaged by lightning or high potential voltage damage, especially application in critical or harsh factory environment. ARSC (Auto RTS Signal Control) technology provides the best way to make half-duplex RS-485 auto data transmission and receiving without software or writing extra code. In addition, auto identify and switch RS-422 and RS-485 technology make more convenience for users changing RS-422 and RS-485 devices without jumpers or switches setting. SUNIX universal PCI Multi-port serial card is the best solution for various industrial communication and automation applications.

further informations

Features

Low RMA rate and high reliability with Sunix’s single chipset designed ASIC
Compliance with PCI ver. 2.2 spec. standard
Supports both 64-bit & 32-bit PCI bus slot and 3.3V & 5V power
Industrial grade design for stability and reliability
128K FIFO buffer can reduce CPU loading, less interruption and improving system performance dramatically
RS-422/485 Auto Identify and Switch technology enable device plug-n-play without jumper or switch setting
ARSC (Auto RTS Signal Control) technology allows accurate switching of the transmitter on and off for precise timing of the data transmission
Optical isolation (2.5KV) provides protection against damage from static electrical charge
Surge protection (600W) provides protection against surge damage from high energy spike
RS-422/485 Handshaking Communication provides hardware flow control for best prevention of data error or data lost
Plug-n-Play, I/O address and IRQ assigned by BIOS
RS-422/485 industrial host controller series are certified by WHQL, CE, FCC approval
Support Microsoft Windows, Linux, and DOS

Function

Type Universal PCI Serial card

Mode of Operation Differential

Bus Transceiver RS-422 Full-Duplex
RS-485 Half-Duplex

Driver per Line RS-422: 1 Driver
RS-485: 32 Drivers

Receiver per Line RS-422: 10 Receivers
RS-485: 32 Receivers

**Function**
Type	Universal PCI Serial card
Mode of Operation	Differential
Bus Transceiver	RS-422 Full-Duplex RS-485 Half-Duplex
Driver per Line	RS-422: 1 Driver RS-485: 32 Drivers
Receiver per Line	RS-422: 10 Receivers RS-485: 32 Receivers

Hardware

Host Controller SUN1889 UART (16C650 compatible)

Bus Interface 32-bit / 64-bit Universal PCI
3.3V / 5V bus power

PCB Connector DB9M connector

Number of Port 2 x RS-422/485

Dimensions (WxD) 120 x 80 mm

Bracket Standard 121 mm

**Hardware**
Host Controller	SUN1889 UART (16C650 compatible)
Bus Interface	32-bit / 64-bit Universal PCI 3.3V / 5V bus power
PCB Connector	DB9M connector
Number of Port	2 x RS-422/485
Dimensions (WxD)	120 x 80 mm
Bracket	Standard 121 mm

Communication

IRQ & I/O Address BIOS assigned

FIFO 32 byte on-board FIFO
128K byte assigned FIFO

RS-485 RTS Control Auto RTS Signal Control (ARSC)

RS-422/485 Select RS-422/485 Auto Identify & Switch (AIS)

Baud Rate Up to 921.6 Kbps

Data Bits 4, 5, 6, 7, 8

Stop Bits 1, 1.5, 2

Parity None, Odd, Even, Space, Mark

Flow Control None, Xon/Xoff, RTS/CTS

Data Signal RS-422: Tx+, Rx+, Tx-. Rx-, RTS+, CTS+, RTS-, CTS-
RS-485: Data+, Data-, RTS+, CTS+, RTS-, CTS-

**Communication**
IRQ & I/O Address	BIOS assigned
FIFO	32 byte on-board FIFO 128K byte assigned FIFO
RS-485 RTS Control	Auto RTS Signal Control (ARSC)
RS-422/485 Select	RS-422/485 Auto Identify & Switch (AIS)
Baud Rate	Up to 921.6 Kbps
Data Bits	4, 5, 6, 7, 8
Stop Bits	1, 1.5, 2
Parity	None, Odd, Even, Space, Mark
Flow Control	None, Xon/Xoff, RTS/CTS
Data Signal	RS-422: Tx+, Rx+, Tx-. Rx-, RTS+, CTS+, RTS-, CTS- RS-485: Data+, Data-, RTS+, CTS+, RTS-, CTS-

Protection

Isolation Protection 2.5KV Peak Pulse

Surge Protection 600W ESD

**Protection**
Isolation Protection	2.5KV Peak Pulse
Surge Protection	600W ESD

OS Support

64-bit System Intel Itanium and AMD Athlon 64 64-bit CPU System

Microsoft Win 9x/ME/NT, Win 2K/XP/2003, Win CE

Linux 2.0.x / 2.2.x / 2.4.x / 2.6.x

DOS DOS

**OS Support**
64-bit System	Intel Itanium and AMD Athlon 64 64-bit CPU System
Microsoft	Win 9x/ME/NT, Win 2K/XP/2003, Win CE
Linux	2.0.x / 2.2.x / 2.4.x / 2.6.x
DOS	DOS

Operating Environment

Operating
Temperature 0 ~ 57 °C

Humidity 5 ~ 95% RH

Storage Temperature -20 ~ 85 °C

**Operating Environment**
Operating Temperature	0 ~ 57 °C
Humidity	5 ~ 95% RH
Storage Temperature	-20 ~ 85 °C

Regulatory Approvals

Hardware CE, FCC (Class B)

Driver WHQL

**Regulatory Approvals**
Hardware	CE, FCC (Class B)
Driver	WHQL

Package Content

Product Sunix 8139 PCI Card

Cable -

CD Sunix software & driver CD

Manual Sunix user manual

**Package Content**
Product	Sunix 8139 PCI Card
Cable	-
CD	Sunix software & driver CD
Manual	Sunix user manual

Available Model

8139
2 ports RS-422/485 Universal PCI Card

8139S
2 ports RS-422/485 Universal PCI Card with Surge Protection

8139I
2 ports RS-422/485 Universal PCI Card with Isolation Protection

8139SI
2 ports RS-422/485 Universal PCI Card with Surge and Isolation Protection

8139	2 ports RS-422/485 Universal PCI Card
8139S	2 ports RS-422/485 Universal PCI Card with Surge Protection
8139I	2 ports RS-422/485 Universal PCI Card with Isolation Protection
8139SI	2 ports RS-422/485 Universal PCI Card with Surge and Isolation Protection