MOXA AWK-3121 Series
Industrial IEEE 802.11a/b/g Wireless AP/Bridge/AP Client
similar products 
print this page 
add to the notes 
show the notes 
AWK-3121 Series Datasheet (898.7 kB) properties
- IEEE802.11a/b/g compliant
- Power input by redundant 24 VDC power inputs or IEEE 802.3af-compliant Power-over-Ethernet
- powerful security with WEP/WPA/WPA2/IP packet filters
- RS-232 console management
- STP/RSTP support to increase reliability
- DIN-Rail or wall mounting capability
- IP30 protected high-strength metal housing
- -40 to 75°C operating temperature range (-T model)
description
Are your industrial applications hard to wire, or are your wiring costs out of control? Are you already using mobile equipment that connects over an IP network?
If so, then what you need is the AWK-3121 Access Point/Bridge/Client. The AWK-3121 is rated to operate at temperatures ranging from 0 to 60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough for any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or distribution boxes. The DIN-Rail mounting capability, wide operating temperature range, and IP30 case with LED indicators make the AWK-3121 a convenient yet reliable solution for any industrial wireless application.
further informations
Features
Advanced Security Capability
- 64-bit and 128-bit WEP (Wired Equivalent Privacy)
- Enable/disable SSID broadcasts
- WPA/WPA2 (Wi.Fi Protected Access) support
- IEEE 802.1X/RADIUS support
- powerful IP packet filters
Useful Functions and Remote Configuration
- Firmware upgrade from TFTP or HTTP
- Console/web-based management
- SNMP and STP/RSTP supported
- Configuration backup and reset
- easy client deployment with DHCP
Industrial Grade Design
- Operating temperature range from 0 to 60°C
-40 to 75°C for -T models - Alarm contact: 1 relay output with current carrying capacity of 1A @ 24VDC
- Digital Inputs: 2 electrically-isolated inputs
0 to 3.3V for state "0" (OFF)
10 to 48V for state "1" (ON)
Max. input current: 8 mA - redundant dual DC power inputs or 48VDC Power-over-Ethernet
- DIN-Rail or panel mounting capability
- IP30 protection, metal case
Recommended Accessory
- DR Series DIN-Rail Power Supply
© 2011 - S-Connect Ltd. Phone: +44 (0) 1276 203 100 Fax: +44 (0) 1276 203 300 eMail
2012, again you will find SPHINX attending to the Embedded World.
Do not miss our products for the railway market.