properties

• 32 bits PCI bus with Plug and Play (PnP) features.
  
• Support 16 photo couple input/output channels.
  
• Allow the photo input/output signals to be completely floated and prevent the ground loops.
  
• 16 LED correspond to 16 output ports activation status.
  
• By using 4N33 photo couple chips.
  
• 1500V isolation voltage.
  
• Maximum load voltage is 30V.
  
• Maximum 80mA input current.
  
• Voltage range from 0V to 30V, where 0 to 3V is OFF and 5V to 30V is ON.
  
• By using 4N33 photo couple chips.
  
• Relative humidity rage from 0 to 90%.

description

The PCI 16 channels photo isolator input/output adapter is a 32 bits PCI bus board with Plug and Play (PnP) features, it is a programmable I/O interface card for PC/486, Pentium, or compatibles. The PnP features let hardware configuration for IRQ and I/O address is detected by BIOS automatically, you don’t need set switch and jumper.
The PCI 16 channels photo isolator input/output adapter provides 16 photo couple digital input/output channels, which allow the input/output signals to be completely floated and prevent the ground loop.