- DECISION PCI 14 BIT Data Acquisition Card -

DECISION PCI 14 BIT Data Acquisition Card

properties  description

properties

• 32 bits PCI bus with Plug and Play (PnP) features.
  
• Programmable I/O control functions.
  
• Provides 16 A/D channels and the resolution is 14 bits.
  
• Provides 2 D/A channels and the resolution is 14 bits.
  
• D/A voltage range from 0 to 10V or –10V to 10V selectable.
  
• Different on board A/D chips selectable. The input voltage range from 0 to 2.5V or 0 to 5V for unipolar, and from –2.5V to 2.5V or –5V to 5V or –10V to 10V for bipolar.
  
• Provides 1 digital input/digital output channels and the resolution is 16 bits.
  
• Provides three 16 bits counter to trig A/D conversion.
  
• Provides software, external hardware signal or internal counter to trig A/D conversion.
  
• By using sampling and hold to get A/D signals.
  
• Interrupt or polling driven selectable.
  
• Gain control factor selectable from 1 to 8.

description

The PCI bus 14 bit data acquisition card is a 32 bits PCI bus adapter with Plug and Play (PnP) features, it is a programmable I/O interface for Pentium or compatible computers. The PnP features let hardware configuration for IRQ and I/O address is detected by BIOS automatically, you don’t need set switch and jumper.
The PCI bus 14 bit data acquisition card is a high precision data conversion/acquisition system. It contains 16 analog to digital channels with unipolar or bipolar input, 2 digital to analog channels with unipolar or bipolar output and 1 digital I/O channel with 16 bit line. The on board 8254(71054) chip provides programmable interval timer/counter functions to trig A/D conversion. The PCI bus 14 bit data acquisition card also provides interrupt driven for convention A/D input.

 similar products

 print this page

 add to the notes

 show the notes