properties

• High quality, multi standard audio encoding and decoding in formats: G.711 (µLaw/aLaw, 8 and 24 kHz), 16bit PCM uncompressed (8 and 24 kHz), MP3 (16, 22.05, 24, 32, 44.1, 48 kHz)
  
• Bidirectional audio transport over IP: Push to talk (PTT), software controlled, audio level controlled, full duplex for G.711
  
• Dual 100Mbit Ethernet ports
  
• Microphone input (coil, powered or passive capacitive)
  
• Standard stereo Line In and 3Vpp audio signal outputs
  
• 1 S/P DIF Input and 1 S/P DIF Output
  
• 2 TTL level UARTs, 1 USB1.1 interface, 1 CAN Bus interface
  
• Small form factor (53mm x 39mm x 6mm)
  
• Runs off a single +5Volt DC power source (1.6W max.)
  
• Integrated CPU / MAC / IO controller @ 12 to 125 MHz with on-chip 256 KB zero wait state static RAM
  
• 2 KB EEprom for configuration store
  
• 1 MB Flash memory for application and web server content
  
• Embedded and robust operating system, fully routable IP stack
  
• IP standard based protocols (TCP/IP, UDP, HTTP, ICMP,SNMP), supports BootP, DHCP and Auto IP
  
• Integrated web server for configuration, control, update and streaming functions
  
• Fully documented Application Programming Interface (API)
  
• Highly customizable user interface (HTML) with development kit
  
• Special software features in OEM versions on request

description

The Barix IP audio module (measuring only 1.5" x 2.5") carries the full capabilities of all Barix audio products including dual Ethernet suitable for bridging, a USB interface and dual serial ports, among additional features. This module can be loaded with standard Annuncicom, Instreamer, Exstreamer or OEM firmware. The IP Audio Module is a typical OEM product which allows customers to easily integrate IP audio streaming and IP-based control into their devices while eliminating long development cycles.

further informations

Further documentation and software at Barix


( replacement for the IPAM-100 )